I have just installed OpenDX and Exceed on a friend's WinNT machine, the same versions that I have running happily on my Win98 machine, and I'm having trouble getting the X client/server stuff working. The messages that I get on starting DX (dx -edit) are:
Cannot open connect stream TRANS (SocketINETGetAddr): tnamebysocket() failed TRANS (SocketINETConnect): TRANS (SocketINETGetAddr) failed TRANS (Open): transport open failed for 127.0.0.1:0 Error can't open display. I'm not sure if this is a question for here or for the Exceed tech support. I have followed the same steps that worked on my Win98 box. I can ping localhost and localpc (both are 127.0.0.1). DISPLAY is set to 128.0.0.1:0. I start Exceed manually. The only obvious difference between the NT machine and mine is that he is running ZoneAlarm. This is configured to allow local network access to Exceed, dxui, and dxexec. Any suggestions? Thanks Gib NOTICE - This e-mail is only intended to be read by the named recipient. It may contain information which is confidential, proprietary or the subject of legal privilege. If you are not the intended recipient please notify the sender immediately and delete this e-mail. You may not use any information contained in it. Legal privilege is not waived because you have read this e-mail. For further information on the Beca Group of Companies, visit our web page http://www.beca.co.nz
