I checked the Pick dialog box, and selected the expand button, and the
settings were the same on the PC network and the SGI network - the SGI is
an ONYX2, IRIX 6.5.9.
Gerry
At 07:36 AM 8/30/2001 -0400, you wrote:
Sorry if you are tired of reading about this.
The method suggested by Chirs worked on my PC. However, when I
transferred the network (test.net) on an SGI, I got only the first
point. I had another network that displayed 4 datasets as opposed to the
one dataset in test.net and created the same pick and store modules. In
this case, the first point and the last point - none of the points
in-between were saved. Does the GetGlobal and SetGlobal work differently
on a PC with WinNT and on an SGI?
Regards,
Gerry
I developed my test on an SGI Indigo, Irix 6.5.x. Make sure you've opened
Pick's config dialog box and inspected the meaning and setting of all the
hidden inputs. Maybe you had one toggled differently.
Chris Pelkie
Vice President/Scientific Visualization Producer
Conceptual Reality Presentations, Inc.
30 West Meadow Drive
Ithaca, NY 14850
[EMAIL PROTECTED]
