Thanks Ian, I will wait then, I will also have a look at the
NEHTA archetypes. I will continue asking about how to include medication
properly in the clinical list.

        Regards.
        Carlos.

-----Original Message-----
From: [email protected]
[mailto:openehr-technical-bounces at lists.openehr.org] On Behalf Of Ian
McNicoll
Sent: jueves, 13 de septiembre de 2012 20:20
To: For openEHR technical discussions
Subject: Re: Issue (probably known) with ADL Workbench

Hi Carlos

Welcome to openEHR. This is a known issue, not with the Workbench but
with the archetype itself. This is pretty old and breaks a validation
rule that was not enforced properly in the Archetype Editor in the past.
I have actually fixed or worked around most of the validation errors
that AWB reports but have not had time to commit the fixes to CKM yet.
As soon as I have a proper web connect I will do so at least for that
archetype.

The problem is a bit obscure for an openEHR newbie but is related to a
bit of ADL syntax that is not currently supported in the Archetype
Editor but which is required if multiple constraints of the same
datatype are applied to a single element. You should also be aware that
our intention is to replace the current CKM medication archetype with
others based on the NEHTA medication archetypes.

Ian

Dr Ian McNicoll
Clinical modelling consultant Ocean Informatics Mobile +44 (0) 775 209
7859 Skype imcnicoll

On 13 Sep 2012, at 12:00, Carlos Cavero Barca
<carlos.cavero at atosresearch.eu> wrote:

>
>    Hi all,
>
>    I'm quite new in openEHR, testing last released version of ADL 
> workbench I received an error (ERROR line 87 [last cADL token =
> V_C_DOMAIN_TYPE]: (VACSIT) cannot add C_DV_QUANTITY object with 
> rm_type_name=DV_QUANTITY to singly-valued attribute value because 
> attribute already has child with same RM type) when I tried to load 
> the openEHR-HER-ITEM_TREE.medication.v1.adl (draft version). I don't 
> know if this is known or unknown but just in case.
>
>    If I remove from line 73 to line 98 (C_DV_QUANTITY multiple 
> references, just leaving one of them) the archetype is perfectly
loaded.
> The same happened with
> openEHR-EHR-ITEM_TREE.medication-formulation.v1.adl. In this case the 
> C_DV_QUANTITY values are empty and you need to include values on them.
>
>    Thanks and regards.
>    Carlos.
> ------------------------------------------------------------------
> This e-mail and the documents attached are confidential and intended 
> solely for the addressee; it may also be privileged. If you receive 
> this e-mail in error, please notify the sender immediately and destroy
it.
> As its integrity cannot be secured on the Internet, the Atos group 
> liability cannot be triggered for the message content. Although the 
> sender endeavours to maintain a computer virus-free network, the 
> sender does not warrant that this transmission is virus-free and will 
> not be liable for any damages resulting from any virus transmitted.
>
> Este mensaje y los ficheros adjuntos pueden contener informacion 
> confidencial destinada solamente a la(s) persona(s) mencionadas 
> anteriormente pueden estar protegidos por secreto profesional.
> Si usted recibe este correo electronico por error, gracias por 
> informar inmediatamente al remitente y destruir el mensaje.
> Al no estar asegurada la integridad de este mensaje sobre la red, Atos

> no se hace responsable por su contenido. Su contenido no constituye 
> ningun compromiso para el grupo Atos, salvo ratificacion escrita por
ambas partes.
> Aunque se esfuerza al maximo por mantener su red libre de virus, el 
> emisor no puede garantizar nada al respecto y no sera responsable de 
> cualesquiera danos que puedan resultar de una transmision de virus.
> ------------------------------------------------------------------
>
>
> _______________________________________________
> openEHR-technical mailing list
> openEHR-technical at lists.openehr.org
> http://lists.openehr.org/mailman/listinfo/openehr-technical_lists.open
> ehr.org

_______________________________________________
openEHR-technical mailing list
openEHR-technical at lists.openehr.org
http://lists.openehr.org/mailman/listinfo/openehr-technical_lists.openeh
r.org
------------------------------------------------------------------
This e-mail and the documents attached are confidential and intended 
solely for the addressee; it may also be privileged. If you receive 
this e-mail in error, please notify the sender immediately and destroy it. 
As its integrity cannot be secured on the Internet, the Atos 
group liability cannot be triggered for the message content. Although 
the sender endeavours to maintain a computer virus-free network, 
the sender does not warrant that this transmission is virus-free and 
will not be liable for any damages resulting from any virus transmitted. 

Este mensaje y los ficheros adjuntos pueden contener informacion confidencial 
destinada solamente a la(s) persona(s) mencionadas anteriormente 
pueden estar protegidos por secreto profesional. 
Si usted recibe este correo electronico por error, gracias por informar 
inmediatamente al remitente y destruir el mensaje. 
Al no estar asegurada la integridad de este mensaje sobre la red, Atos 
no se hace responsable por su contenido. Su contenido no constituye ningun 
compromiso para el grupo Atos, salvo ratificacion escrita por ambas partes. 
Aunque se esfuerza al maximo por mantener su red libre de virus, el emisor 
no puede garantizar nada al respecto y no sera responsable de cualesquiera 
danos que puedan resultar de una transmision de virus. 
------------------------------------------------------------------

Reply via email to