Hi Elvis, If you have the "whereis" or "which" commands installed on your system then you can find where commands are located.
So to find wget just type: whereis wget or which wget. For reference wget is installed at /usr/bin/wget on my system. You can run: bitbake -e omap3-console-image This will generate a lot of output but somewhere in there the PATH variable, which OpenEmbedded uses, should be defined. I think you could add to the path using the export command like this: export PATH=/usr/wget/bin/wget:$PATH That will only work for the shell your using and will noy be saved if you close the shell. I hope that helps. Malcolm BTW. if you don't have whereis or which then you could use the following command: cd / find . -name "wget" But it could take some time to find where wget is. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Elvis Dowson Sent: 04 December 2008 19:16 To: Using OE Subject: Re: How to setup Overo build environment on Mac OS X 10.5.5 Hi Malcom, I solved the problem of bitbake not being able to find git. git was installed to /usr/local/git/bin so I created a symbolic link to git as follows ln -s /usr/local/git/bin/git /usr/local/bin/git so that it appeared to be in /usr/local/bin This solved the problem of running git. Now I get problems related to wget. Could you please tell me where it is located on your system? Best regards, Elvis _______________________________________________ Openembedded-users mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users _______________________________________________ Openembedded-users mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
