On Wed, May 30, 2012 at 1:11 PM, Salman Malik <salma...@live.com> wrote: > Hi All, > > I have been looking at the cbench utlility and found that it works almost > fine when the controller lies on the localhost, but when controller lies on > a remote host I see no replies from the controller. I can see the packet_in > messages at the controller side using wireshark and it seems that that the > source and destination IP addresses of the packets are somewhat hard coded > to 192.168.0.40 and 192.168.1.40 respectively. Furthermore, I don't see any > option/argument for changing these values. > > So perhaps my question is: Can I test a remote controller using cbench ?
My high-level reply is that cbench definitely works with remote controllers and people have used it to do that all of the time. My guess is that you're having some sort of environmental problem, e.g., a firewall blocking the connection. Hope this helps, - Rob . _______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
