On Wed, May 30, 2012 at 1:24 PM, Salman Malik <salma...@live.com> wrote: > Thanks for the quick reply Rob. > In my configuration I am using two VMs connected in a host-only network mode > and I can ping fine between the two VMs. And while using cbench I see the > right src/dst IPs in the packets when the switches send 'Hello' messages to > the controller but rest of the messages have 192.x.x.x type of addresses. > Furthermore, even when using it with the local host I see some of the > packets with these 192.x.x.x addresses. So I think its not a firewall issue. > > I am using the OpenFlow tutorial VM which has preinstalled cbench and I > start it with "cbench --controller=<remote-IP>". May be I am doing something > wrong here.
So there was just a thread about this on the floodlight mailing list, but the solution was that someone was using an older version of cbench. Do make sure you're using the up to date version from `git clone git://openflow.org/oflops`. Also check http://www.openflowhub.org/display/floodlightcontroller/Performance for cbench and floodlight configuration for cbench information. - Rob . _______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
