Any ideas guys ?

From: salma...@live.com
To: rob.sherw...@bigswitch.com
CC: openflow-discuss@lists.stanford.edu
Subject: RE: [openflow-discuss] cbench utility
Date: Wed, 30 May 2012 15:24:32 -0500





Thanks for the quick reply Rob.
In my configuration I am using two VMs connected in a host-only network mode 
and I can ping fine between the two VMs. And while using cbench I see the 
correct src/dst IPs in the packets when the switches send 'Hello' messages to 
the controller but rest of the messages have 192.x.x.x type of addresses. 
Furthermore, even when using it with the local host I see some of the packets 
with these 192.x.x.x addresses. So I think its not a firewall issue.

I am using the OpenFlow tutorial VM which has preinstalled cbench and I start 
it with "cbench --controller=<remote-IP>". May be I am doing something wrong 
here.

Salman

> Date: Wed, 30 May 2012 13:15:40 -0700
> Subject: Re: [openflow-discuss] cbench utility
> From: rob.sherw...@bigswitch.com
> To: salma...@live.com
> CC: openflow-discuss@lists.stanford.edu
> 
> On Wed, May 30, 2012 at 1:11 PM, Salman Malik <salma...@live.com> wrote:
> > Hi All,
> >
> > I have been looking at the cbench utlility and found that it works almost
> > fine when the controller lies on the localhost, but when controller lies on
> > a remote host I see no replies from the controller. I can see the packet_in
> > messages at the controller side using wireshark and it seems that that the
> > source and destination IP addresses of the packets are somewhat hard coded
> > to 192.168.0.40 and 192.168.1.40 respectively. Furthermore, I don't see any
> > option/argument for changing these values.
> >
> > So perhaps my question is: Can I test a remote controller using cbench ?
> 
> My high-level reply is that cbench definitely works with remote
> controllers and people have used it to do that all of the time.  My
> guess is that you're having some sort of environmental problem, e.g.,
> a firewall blocking the connection.
> 
> Hope this helps,
> 
> - Rob
> .
                                                                                
  
_______________________________________________
openflow-discuss mailing list
openflow-discuss@lists.stanford.edu
https://mailman.stanford.edu/mailman/listinfo/openflow-discuss

Reply via email to