Dear All, I am configuring the HP 3500yl openflow switch. I already burn the firmware K15.10 version into the secondary OS of the HP openflow switch and boot as the secondary OS. I think the openflow is already successfully installed on the HP switch since I can use openflow CLI to configure. The thing is , I can not make my openflow swtich talk to the controller.
I configure the 192.168.1.66 as the ip of HP OFS and 192.168.1.60 for the POX controller as a virtual machine (the physical server is connected to HP OFS) They can ping each other which means the connection is good. But when I configure the OFS by following the manual for K15.10 version. I can not make OFS and POX connected. I configure the instance as aggregate mode but I dont know how can I specific the vlan for controller and vlan for management. The POX is connecting to HP OFS through port 12 which belongs to VLAN1 (the default VLAN). Also, in the manual, there is one command line which can not be executed, which is "openflow instance aggregate member vlan vlan-id" There is not member key words. Can anyone help ? I have been struggling on this for 3 days. Thanks very much. -- Best regards, Terry
_______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
