Hi Shabbir ,

Till now I'm still at the starting point. What I'm planning to do is to
hook up my Mikrotik with two AP's ( Tp-Link ) and try and decrease the
latency between the two AP;s when a client roams. Basically VOIP is
affected by this latency and I want to improve it.

I have some readings for latency in a normal network - Two AP's , a Cisco
2960 switch and two clients - one is acting as a PABX and the other client
has a SIP Phone.

I can send you some more details perhaps in the weekend.

As for the Mikrotik i'm using v6.0rc12 and Openflow is supported.

If you want to share some ideas please feel free to do so :)

Cheers
Etienne


On 25 April 2013 08:42, Shabbir Ahmed <shabbir1...@gmail.com> wrote:

> Hi Etienne,
>
> can you share any of ur lab or test scenario? with openflow. i would love
> to read and test them with me.
>
> thank you,
> Shabbir.
>
>
> On Thu, Apr 25, 2013 at 11:05 AM, Etienne Mula <etiennem...@gmail.com>wrote:
>
>> Hi Adria,
>>
>> If the Mikrotik is still supported, you can try and install the Openflow
>> package directly from Mikrotik website as they released the package and
>> they are supporting Openflow . I did the updated on my 450G and it worked
>> fine- I am using floodlight as the controller but it should make a
>> difference.
>>
>> Regards
>> Etienne
>>
>>
>> On 24 April 2013 16:20, adria sole <adrias...@gmail.com> wrote:
>>
>>> Hi everyone, I am configuring a mikrotik 750 GL router with openwrt
>>> (svn://svn.openwrt.org/openwrt/trunk/) and putting after that the
>>> package openflow (git://gitosis.stanford.edu/openflow-openwrt).
>>>
>>> When I do in openwrt (telnet/ssh) console: /etc/init.d/openflow start
>>>
>>> I get an error because of my config, do you know what is the mikrotik
>>> router configuration for:
>>>    - /etc/config/network
>>>    - /etc/config/openflow
>>>
>>> I have seen there are 2 configurations in:
>>> http://www.openflow.org/wk/index.php/Pantou_:_OpenFlow_1.0_for_OpenWRT
>>>
>>> but they are only for:
>>> LinkSys WRT54GL and TP-LINK WR1043ND, what about mikrotik?
>>>
>>> Thank you very much in advance,
>>>
>>>
>>> I have seen in wireshark (traffic sniffer) openfow dialog with my NOX
>>> controller, but my router doesn't reply to the "Set Config" message, but
>>> yes to the others, but because of that it resets the connection and starts
>>> another time with: Hello/Hello, Set Config/No answer, Echo Request/Reply,
>>> Reset, Hello/H...(etc).
>>>
>>> Error:
>>> *root@OpenWrt:/# /etc/init.d/openflow start
>>> eth0.1,eth0.2,eth0.3,eth0.4
>>> Configuring OpenFlow switch for out-of-band control
>>> Jan 01 00:10:52|00001|datapath|ERR|eth0.2 device has assigned IPv6
>>> address fe80::d6ca:6dff:fe64:a6a9
>>> Jan 01 00:10:52|00002|netdev|ERR|ioctl(SIOCGIFINDEX) on eth0.3 device
>>> failed: No such device
>>> ofdatapath: failed to add port eth0.3 (No such device)
>>> No need for further configuration for out-of-band control
>>> Jan 01 00:10:55|00001|vlog|INFO|opened log file /var/log/ofprotocol.log
>>> root@OpenWrt:/# Jan 01 00:10:55|00002|secchan|INFO|OpenFlow reference
>>> implementation version 1.0.0
>>> Jan 01 00:10:55|00003|secchan|INFO|OpenFlow protocol version 0x01
>>> Jan 01 00:10:55|00004|secchan|WARN|new management connection will
>>> receive asynchronous messages
>>> Jan 01 00:10:55|00005|rconn|INFO|unix:/var/run/dp0.sock: connecting...
>>> Jan 01 00:10:55|00006|vconn_unix|ERR|/tmp/vconn-unix.1069.0: connection
>>> to /var/run/dp0.sock failed: No such file or directory*
>>>
>>>
>>> _______________________________________________
>>> openflow-discuss mailing list
>>> openflow-discuss@lists.stanford.edu
>>> https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
>>>
>>>
>>
>>
>> --
>> Thanks and Regards
>> Etienne Mula
>>
>> _______________________________________________
>> openflow-discuss mailing list
>> openflow-discuss@lists.stanford.edu
>> https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
>>
>>
>


-- 
Thanks and Regards
Etienne Mula
_______________________________________________
openflow-discuss mailing list
openflow-discuss@lists.stanford.edu
https://mailman.stanford.edu/mailman/listinfo/openflow-discuss

Reply via email to