r u doing a research type of stuff or just learning? im also trying to do the same thing wat u r up to. so far i could only get to forwarding traffic through TP-LINK AP, the main issue is it's built-in routing/forwarding/switching behavour which activates before openflow. so i cant drop the packet or forward it.
On Thu, Apr 25, 2013 at 11:52 AM, Etienne Mula <etiennem...@gmail.com>wrote: > Hi Shabbir , > > Till now I'm still at the starting point. What I'm planning to do is to > hook up my Mikrotik with two AP's ( Tp-Link ) and try and decrease the > latency between the two AP;s when a client roams. Basically VOIP is > affected by this latency and I want to improve it. > > I have some readings for latency in a normal network - Two AP's , a Cisco > 2960 switch and two clients - one is acting as a PABX and the other client > has a SIP Phone. > > I can send you some more details perhaps in the weekend. > > As for the Mikrotik i'm using v6.0rc12 and Openflow is supported. > > If you want to share some ideas please feel free to do so :) > > Cheers > Etienne > > > On 25 April 2013 08:42, Shabbir Ahmed <shabbir1...@gmail.com> wrote: > >> Hi Etienne, >> >> can you share any of ur lab or test scenario? with openflow. i would love >> to read and test them with me. >> >> thank you, >> Shabbir. >> >> >> On Thu, Apr 25, 2013 at 11:05 AM, Etienne Mula <etiennem...@gmail.com>wrote: >> >>> Hi Adria, >>> >>> If the Mikrotik is still supported, you can try and install the Openflow >>> package directly from Mikrotik website as they released the package and >>> they are supporting Openflow . I did the updated on my 450G and it worked >>> fine- I am using floodlight as the controller but it should make a >>> difference. >>> >>> Regards >>> Etienne >>> >>> >>> On 24 April 2013 16:20, adria sole <adrias...@gmail.com> wrote: >>> >>>> Hi everyone, I am configuring a mikrotik 750 GL router with openwrt >>>> (svn://svn.openwrt.org/openwrt/trunk/) and putting after that the >>>> package openflow (git://gitosis.stanford.edu/openflow-openwrt). >>>> >>>> When I do in openwrt (telnet/ssh) console: /etc/init.d/openflow start >>>> >>>> I get an error because of my config, do you know what is the mikrotik >>>> router configuration for: >>>> - /etc/config/network >>>> - /etc/config/openflow >>>> >>>> I have seen there are 2 configurations in: >>>> http://www.openflow.org/wk/index.php/Pantou_:_OpenFlow_1.0_for_OpenWRT >>>> >>>> but they are only for: >>>> LinkSys WRT54GL and TP-LINK WR1043ND, what about mikrotik? >>>> >>>> Thank you very much in advance, >>>> >>>> >>>> I have seen in wireshark (traffic sniffer) openfow dialog with my NOX >>>> controller, but my router doesn't reply to the "Set Config" message, but >>>> yes to the others, but because of that it resets the connection and starts >>>> another time with: Hello/Hello, Set Config/No answer, Echo Request/Reply, >>>> Reset, Hello/H...(etc). >>>> >>>> Error: >>>> *root@OpenWrt:/# /etc/init.d/openflow start >>>> eth0.1,eth0.2,eth0.3,eth0.4 >>>> Configuring OpenFlow switch for out-of-band control >>>> Jan 01 00:10:52|00001|datapath|ERR|eth0.2 device has assigned IPv6 >>>> address fe80::d6ca:6dff:fe64:a6a9 >>>> Jan 01 00:10:52|00002|netdev|ERR|ioctl(SIOCGIFINDEX) on eth0.3 device >>>> failed: No such device >>>> ofdatapath: failed to add port eth0.3 (No such device) >>>> No need for further configuration for out-of-band control >>>> Jan 01 00:10:55|00001|vlog|INFO|opened log file /var/log/ofprotocol.log >>>> root@OpenWrt:/# Jan 01 00:10:55|00002|secchan|INFO|OpenFlow reference >>>> implementation version 1.0.0 >>>> Jan 01 00:10:55|00003|secchan|INFO|OpenFlow protocol version 0x01 >>>> Jan 01 00:10:55|00004|secchan|WARN|new management connection will >>>> receive asynchronous messages >>>> Jan 01 00:10:55|00005|rconn|INFO|unix:/var/run/dp0.sock: connecting... >>>> Jan 01 00:10:55|00006|vconn_unix|ERR|/tmp/vconn-unix.1069.0: connection >>>> to /var/run/dp0.sock failed: No such file or directory* >>>> >>>> >>>> _______________________________________________ >>>> openflow-discuss mailing list >>>> openflow-discuss@lists.stanford.edu >>>> https://mailman.stanford.edu/mailman/listinfo/openflow-discuss >>>> >>>> >>> >>> >>> -- >>> Thanks and Regards >>> Etienne Mula >>> >>> _______________________________________________ >>> openflow-discuss mailing list >>> openflow-discuss@lists.stanford.edu >>> https://mailman.stanford.edu/mailman/listinfo/openflow-discuss >>> >>> >> > > > -- > Thanks and Regards > Etienne Mula >
_______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
