hi Luis thanks.
is there a way to define a wild card match for example for any vlan header? doesnt have to be a specific one ? if there is an example code even better. i tried to set a vlan match for example vlan id 100. when it is installed, the match entry in the ovs flow showd a vlan tci match with a vid 100 and a mask 1fff, i have no idea how the mask is set and by who, which doesnt actually match vlan 100 traffic for some reason. thanks Xingjun -------------------------------------------------- Xingjun Chu Xingjun Chu M: E: [email protected]<mailto:[email protected]> 2012<tel:2012>实验室-渥太华光系统能力中心 2012<tel:2012> Laboratories-Ottawa Optical System Competency Centre 发件人：Luis Gomez 收件人：Xingjun Chu, 抄 送：[email protected],[email protected],[email protected], 时间：2017-11-05 19:44:18 主 题：Re: [openflowplugin-dev] A question regarding VLAN tagging and untagging Hi Xingjun, AFAIR you have to specify VLAN match when you set or pop vlan, not when you push. > On Nov 5, 2017, at 7:13 AM, Xingjun Chu <[email protected]> wrote: > > BTW, > > On top of the previous email, as an example, here is the flow table with > vlan pop action I dumped using openflow rest api. it is in config, but not > installed. > > { > "flow-node-inventory:table": [ > { > "id": 80, > "flow": [ > { > "id": "DEFAULT_PIPELINE_FLOW_80", > "hard-timeout": 0, > "idle-timeout": 0, > "match": {}, > "instructions": { > "instruction": [ > { > "order": 0, > "apply-actions": { > "action": [ > { > "order": 0, > "pop-vlan-action": {} > } > ] > } > }, > { > "order": 1, > "go-to-table": { > "table_id": 110 > } > } > ] > }, > "barrier": true, > "priority": 0, > "table_id": 80, > "flow-name": "DEFAULT_PIPELINE_FLOW_80" > } > ] > } > ] > } > > > thanks > Xingjun > From: Xingjun Chu > Sent: Sunday, November 05, 2017 9:28 AM > To: [email protected]; > [email protected] > Cc: [email protected] > Subject: A question regarding VLAN tagging and untagging > > Hi, > > I have a couple of questions regarding the VLAN relevant action. > > 1) I have a table in the pipeline which does some L3 forwarding. it has some > entries to match dst ip, then modify dst dl address, dec-ttl, resubmit. > etc... Those flows get installed without problem. > . > Now I try to add a "VLAN strip or pop" into the action list of the flow above > for example as the first action , strip or pop VLAN, then modify dst dl > address, dec-ttl, resubmit, etc... I tried both strip or pop action, but > either way the flow didn't get installed. why is that? > > I even tried to just create a separate table with VLAN strip and resubmit as > the default entry, it doesn't get installed either. > > 2) also I found more strange thing is that If I need to push and set a VLAN > ID in the action, Ihave to have a VLAN match first, otherwise > the flow is not get installed. > > BTW I am doing this NOT using REST API of openflowplugin. but > programmatically using Action, Action builder etc... > > Any pointer is greatly appreciated. > > Thanks & Regards > Xingjun > > > > > _______________________________________________ > openflowplugin-dev mailing list > [email protected] > https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev
_______________________________________________ openflowplugin-dev mailing list [email protected] https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev
