Hi Anton, What does Converted Sensor reading means? Are there any API's available to reading these converted sensor values?
Regards Naveen S -----Original Message----- From: ext Anton Pak [mailto:[email protected]] Sent: Wednesday, February 13, 2013 10:06 PM To: [email protected]; Shivegowda, Naveen (NSN - IN/Bangalore) Subject: Re: [Openhpi-devel] Reg. reading sensor data from an ATCA blade Hi Naveen, Usually the converted sensor reading is provided. I don't recall any mechanism in Ipmi/IpmiDirect plug-ins for raw sensor reading value. In PPS HPI implementations it is possible to send arbitrary IPMI command using special HPI control. Anton Pak On Wed, 13 Feb 2013 11:23:33 +0400, Shivegowda, Naveen (NSN - IN/Bangalore) <[email protected]> wrote: > Hi Anton, > > Yes raw sensor data. > I have ACPI5A ATCA blade from which sensor data has to be read. > > Regards > Naveen S > > -----Original Message----- > From: ext Anton Pak [mailto:[email protected]] > Sent: Wednesday, February 13, 2013 12:17 PM > To: [email protected]; Shivegowda, Naveen (NSN - > IN/Bangalore) > Subject: Re: [Openhpi-devel] Reg. reading sensor data from an ATCA blade > > Hi Naveen, > > You mean raw IPMI sensor reading value, right? > > Anton Pak > > On Wed, 13 Feb 2013 09:58:33 +0400, Shivegowda, Naveen (NSN - > IN/Bangalore) <[email protected]> wrote: > >> Hi, >> >> Is it possible to directly read the sensor data from an ATCA blade >> directly using openhpi? >> >> Regards >> Naveen S ------------------------------------------------------------------------------ Free Next-Gen Firewall Hardware Offer Buy your Sophos next-gen firewall before the end March 2013 and get the hardware for free! Learn more. http://p.sf.net/sfu/sophos-d2d-feb _______________________________________________ Openhpi-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openhpi-devel
