Hi Anton, Till date we were installing openhpid on an ATCA node(configured with Shelf Manager details) and used it to fetch the live events and hardware inventory data.
Now if I want to fetch sensor data directly from an ATCA blade using the below mentioned API, is it possible to do so by installing openhpid on that ATCA blade and configuring it with same blade's IP and authentication details? Regards Naveen S -----Original Message----- From: ext Anton Pak [mailto:[email protected]] Sent: Thursday, February 14, 2013 10:31 AM To: [email protected]; Shivegowda, Naveen (NSN - IN/Bangalore) Subject: Re: [Openhpi-devel] Reg. reading sensor data from an ATCA blade Hi Naveen, The API is saHpiSensorReadingGet(). The raw value is in 0-255 range. The converted value is calculated according to formula defined in the IPMI spec: y = func( (Mx + (B * 10^K1 ) ) * 10^K2 ) where x is raw and y is converted values. Anton Pak On Thu, 14 Feb 2013 08:53:16 +0400, Shivegowda, Naveen (NSN - IN/Bangalore) <[email protected]> wrote: > Hi Anton, > > What does Converted Sensor reading means? > Are there any API's available to reading these converted sensor values? > > Regards > Naveen S > > -----Original Message----- > From: ext Anton Pak [mailto:[email protected]] > Sent: Wednesday, February 13, 2013 10:06 PM > To: [email protected]; Shivegowda, Naveen (NSN - > IN/Bangalore) > Subject: Re: [Openhpi-devel] Reg. reading sensor data from an ATCA blade > > Hi Naveen, > > Usually the converted sensor reading is provided. > I don't recall any mechanism in Ipmi/IpmiDirect plug-ins for raw sensor > reading value. > > In PPS HPI implementations it is possible to send arbitrary IPMI command > using special HPI control. > > Anton Pak > > On Wed, 13 Feb 2013 11:23:33 +0400, Shivegowda, Naveen (NSN - > IN/Bangalore) <[email protected]> wrote: > >> Hi Anton, >> >> Yes raw sensor data. >> I have ACPI5A ATCA blade from which sensor data has to be read. >> >> Regards >> Naveen S >> >> -----Original Message----- >> From: ext Anton Pak [mailto:[email protected]] >> Sent: Wednesday, February 13, 2013 12:17 PM >> To: [email protected]; Shivegowda, Naveen (NSN - >> IN/Bangalore) >> Subject: Re: [Openhpi-devel] Reg. reading sensor data from an ATCA blade >> >> Hi Naveen, >> >> You mean raw IPMI sensor reading value, right? >> >> Anton Pak >> >> On Wed, 13 Feb 2013 09:58:33 +0400, Shivegowda, Naveen (NSN - >> IN/Bangalore) <[email protected]> wrote: >> >>> Hi, >>> >>> Is it possible to directly read the sensor data from an ATCA blade >>> directly using openhpi? >>> >>> Regards >>> Naveen S > ------------------------------------------------------------------------------ > Free Next-Gen Firewall Hardware Offer > Buy your Sophos next-gen firewall before the end March 2013 > and get the hardware for free! Learn more. > http://p.sf.net/sfu/sophos-d2d-feb > _______________________________________________ > Openhpi-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/openhpi-devel ------------------------------------------------------------------------------ Free Next-Gen Firewall Hardware Offer Buy your Sophos next-gen firewall before the end March 2013 and get the hardware for free! Learn more. http://p.sf.net/sfu/sophos-d2d-feb _______________________________________________ Openhpi-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openhpi-devel
