Something weird happened (per ssh i killed X because of a not responding system, i had to power off)
and now the boot loader hangs just before listing the installed drives
"BIOS Drive C:" ...
and therefore not showing the oi boot menu.

Boot From DVD with
#beadm activate openindiana-2 zfs:rpool
does work (so i am able to send EMails :-)

#zpool status
does list a wrong device name (/dev/sdc5 but the partition is /dev/dsk/c5t0d0p1),
so i cannot use #bootadm install-bootloader -Mfv

i tried
#installgrub -m /boot/grub/zfs_stage1_5 /boot/grub/stage_2 /dev/rdsk/ct5t0d0s1 with the effect that i only see a cursor in the left upper edge, so its worse than before.

Below are the details.

Any hints are welcome :-)




root@dell:~# zpool status rpool
  pool: rpool
 state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
        still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
        the pool may no longer be accessible by software that does not support
        the features. See zpool-features(5) for details.
  scan: none requested

        NAME         STATE     READ WRITE CKSUM
        rpool        ONLINE       0     0     0
          /dev/sdc5  ONLINE       0     0     0

errors: No known data errors
root@dell:~# format
Searching for disks...done

       0. c5t0d0 <Samsung-SSD 850 EVO 250GB-EMT01B6Q cyl 36593 alt 2 hd 224 sec 56>
Specify disk (enter its number): ^C
root@dell:~# bootadm install-bootloader -Mfv
be_do_installboot: device /dev/sdc5
be_do_installboot: install failed for device /dev/sdc5.
  Command: "/usr/sbin/installboot -F -m -f //boot/pmbr //boot/gptzfsboot /dev/sdc5/r"
installing loader to whole disk device is not supported
open: No such file or directory
Unable to open device /dev/sdc5/r
be_run_cmd: command terminated with error status: 1

openindiana-discuss mailing list

Reply via email to