> Hi James, > > On Mon, Feb 6, 2012 at 11:43 PM, James Robinson <[email protected]> wrote: > > Hello, > > I see that there is an imx53.cfg in the target directory. Is anyone > > using this with a board configuration? I am trying to connect to an > > iMX53qsb and I am getting the following errors.... > > Thanks, > > James > > > > robinsoj@ideacentre01:~$ openocd > > Open On-Chip Debugger 0.6.0-dev-00382-gde81260 (2012-02-04-22:08) > > Licensed under GNU GPL v2 > > For bug reports, read > > http://openocd.sourceforge.net/doc/doxygen/bugs.html > > Info : only one transport option; autoselect 'jtag' > > Warn : imx53.SDMA: nonstandard IR value > > RCLK - adaptive > > Info : RCLK (adaptive clock speed) not supported - fallback to 1000 kHz > > Polling target failed, GDB will be halted. Polling again in 100ms > > Polling target failed, GDB will be halted. Polling again in 300ms > > Info : JTAG tap: imx53.DAP tap/device found: 0x1ba00477 (mfg: 0x23b, > > part: 0xba00, ver: 0x1) > > Info : TAP imx53.SDMA does not have IDCODE > > Info : JTAG tap: imx53.SJC tap/device found: 0x1190d01d (mfg: 0x00e, > > part: 0x190d, ver: 0x1) > > Warn : failed to enable tap imx53.DAP > > Runtime Error: embedded:startup.tcl:20: > > in procedure 'jtag' > > in procedure 'ocd_bouncer' > > at file "embedded:startup.tcl", line 20 > > I am getting similar errors on a mx51evk as well: > > This is what I tried (passed efikamx.cfg in my openocd.cfg): > > sudo openocd > Open On-Chip Debugger 0.6.0-dev-00381-gbce7009 (2012-02-03-08:06) > Licensed under GNU GPL v2 > For bug reports, read > http://openocd.sourceforge.net/doc/doxygen/bugs.html > 1000 kHz > Info : only one transport option; autoselect 'jtag' > RCLK - adaptive > Warn : imx51.SDMA: nonstandard IR value > RCLK - adaptive > trst_only separate trst_push_pull > Info : RCLK (adaptive clock speed) not supported - fallback to 1000 kHz > Polling target failed, GDB will be halted. Polling again in 100ms > Polling target failed, GDB will be halted. Polling again in 300ms > Info : JTAG tap: imx51.DAP tap/device found: 0x1ba00477 (mfg: 0x23b, > part: 0xba00, ver: 0x1) > Info : TAP imx51.SDMA does not have IDCODE > Info : JTAG tap: imx51.SJC tap/device found: 0x1190c01d (mfg: 0x00e, > part: 0x190c, ver: 0x1) > Warn : failed to enable tap imx51.DAP > Runtime Error: embedded:startup.tcl:20: > in procedure 'jtag' > in procedure 'ocd_bouncer' > at file "embedded:startup.tcl", line 20 > Info : imx51.cpu: hardware has 1 breakpoints, 1 watchpoints > Polling succeeded again > > Then on another terminal: > > fabio@fabio-Latitude-E6410:~$ telnet localhost 4444 > Trying ::1... > Trying 127.0.0.1... > Connected to localhost. > Escape character is '^]'. > Open On-Chip Debugger > > > halt > > Timeout waiting for halt > in procedure 'halt' > > Marek, does efikamx target connect well with the latest OpenOCD? > > Any ideas? > > Thanks, > > Fabio Estevam
Hi, halt never really worked for me unless I had some additional pin connected (SRST I think). Check that. M ------------------------------------------------------------------------------ Keep Your Developer Skills Current with LearnDevNow! The most comprehensive online learning library for Microsoft developers is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3, Metro Style Apps, more. Free future releases when you subscribe now! http://p.sf.net/sfu/learndevnow-d2d _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
