On 2 May 2012 05:08, Mathias K. <kes...@freenet.de> wrote: > Hello, > > i think it's a initializing problem of the cpu and not a communication > problem. The TAPID is correct > received from STLINK but all memory read fails. > > Is the problem is gone if you press the on-board reset button? > Is your firmware always crash? If so try to hold the reset button and > reconnect. >
it may also be worth trying the following patch: http://openocd.zylin.com/607 and the adding the following to your config reset_config srst_only srst_nogate This should give you the same behaviour as Mathias suggested. Cheers Spen ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
