Hallo all, for some time i needed to configure openocd for my board, and i didn't understood x16_as_x8 option. After reading of many documentations it starting to make sense. I think some clarification is needed on this help page. Here is my variant: Many cfi chips support 16 and 8 bit modes. Most important difference is use of so called "Q15/A-1" pin. In 16bit mode this pin is used for data IO. In 8bit mode, it is an address input which add one more least significant bit (LSB). In this case we should shift all addresses by one: For example 0xaa << 1 = 0x154
-- Regards, Oleksij ------------------------------------------------------------------------------ Symantec Endpoint Protection 12 positioned as A LEADER in The Forrester Wave(TM): Endpoint Security, Q1 2013 and "remains a good choice" in the endpoint security space. For insight on selecting the right partner to tackle endpoint security challenges, access the full report. http://p.sf.net/sfu/symantec-dev2dev _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
