openocd-devel  

Messages by Thread

• [PATCH]: bec4c752ce target: armv4_5: rewrite commands 'arm mcr/mrc' as COMMAND_HANDLER gerrit
• [PATCH]: eca69ee75f flash: nor: rewrite command 'flash list' as COMMAND_HANDLER gerrit
• [PATCH]: c6b20caa86 target: aarch64: rewrite commands 'aarch64 mcr/mrc' as COMMAND_HANDLER gerrit
• [PATCH]: f00cbf29ff jtag: rewrite command 'jtag arp_init-reset' as COMMAND_HANDLER gerrit
• [PATCH]: aa2e631ffb transport: rewrite command 'transport select' as COMMAND_HANDLER gerrit
• [PATCH]: 528573f95f jtag: rewrite command 'flush_count' as COMMAND_HANDLER gerrit
• [PATCH]: c920bf1448 helper: util: rewrite command 'ms' as COMMAND_HANDLER gerrit
• [PATCH]: 72fa775a36 target: arm_tpiu_swo: rewrite command 'tpiu disable' as COMMAND_HANDLER gerrit
• [PATCH]: b575340bef target: rewrite command 'target smp' as COMMAND_HANDLER gerrit
• [PATCH]: 920eaabda9 jtag: rewrite command 'jtag names' as COMMAND_HANDLER gerrit
• [PATCH]: 6b8cc7d722 target: rewrite command 'read_memory' as COMMAND_HANDLER gerrit
• [PATCH]: dc6336ae6d target: arm_tpiu_swo: rewrite command 'tpiu enable' as COMMAND_HANDLER gerrit
• [PATCH]: aaabfed245 rtt: rewrite command 'rtt channellist' as COMMAND_HANDLER gerrit
• [PATCH]: dc10a4c8c6 target: arm_tpiu_swo: rewrite command 'tpiu names' as COMMAND_HANDLER gerrit
• [PATCH]: bde73e0040 target: cti: rewrite command 'cti names' as COMMAND_HANDLER gerrit
• [PATCH]: 68c6988e7b openocd: rewrite command 'version' as COMMAND_HANDLER gerrit
• [PATCH]: 0755064403 Add LPC804 support. gerrit
• [PATCH]: 9e4ec6eef8 jtag/drivers/cmsis_dap: run queue on reaching transaction limit gerrit
• [openocd:tickets] #383 Connection issue from bcm2835gpio with connect_assert_srst on atsamc21g18a Luke V
  • [openocd:tickets] #383 Connection issue from bcm2835gpio with connect_assert_srst on atsamc21g18a Tomas Vanek
  • [openocd:tickets] Re: #383 Connection issue from bcm2835gpio with connect_assert_srst on atsamc21g18a Luke V
• [PATCH]: fd28414332 FreeRTOS: added support to M3_MPU & M4_MPU ports gerrit
• [PATCH]: 5e54d1ecce Adds FreeRTOS:MPU stackings of cortex-m3/cortex-m4 gerrit
• [PATCH]: 54698f878a Adds arm's cortex-m3/4 MPU registers gerrit
• [PATCH]: 25952e3db8 Update FreeRTOS's thread stack model decision tree. gerrit
• [PATCH]: b617aca445 Patch FreeRTOS task name parsing. gerrit
• [PATCH]: ca38e918f1 Add MPU detection logic to FreeRTOS thread's stack parsing. gerrit
• [PATCH]: 2b31a888fd Adds FreeRTOS::MPU stacking info gerrit
• [PATCH]: 78b864ccd0 add configuration for st_nucleo_h723zg gerrit
• [openocd:tickets] #382 errorin target/stm32h7x.cfg Niki W. Waibel
  • Re: [openocd:tickets] #382 errorin target/stm32h7x.cfg Tommy Murphy
  • [openocd:tickets] Re: #382 errorin target/stm32h7x.cfg Tommy Murphy
  • [openocd:tickets] #382 errorin target/stm32h7x.cfg Niki W. Waibel
  • [openocd:tickets] Re: #382 errorin target/stm32h7x.cfg Tommy Murphy
• [openocd:tickets] #381 gdb crashes: openocd reports that the current thread is 0 Jérôme Pouiller
  • [openocd:tickets] #381 gdb crashes: openocd reports that the current thread is 0 Tomas Vanek
• [PATCH]: d2690779a3 tcl/tools/test_cpu_speed: Fix register name gerrit
• [PATCH]: 0a92c51424 bugfix/enhancement: add use_remote_sleep option to remote_bitbang gerrit
• [PATCH]: 5a42af73b4 helper: command: drop last LF ('\n') from sequence of command_print() gerrit
• [PATCH]: a4fe92ea6a README: Remove statement about libjaylink Git submodule gerrit
• [PATCH]: 6b02c19060 Octal mode up for stmqspi driver gerrit
• [PATCH]: 3407c15f1f flash/nor/stm32l4x: Add revision 'Z' for STM32L552/562 devices gerrit
• [PATCH]: e89afee044 jtag: drivers: fix for libusb API change gerrit
• [PATCH]: 4f67d944ab tcl: add helper to parse devicetree properties gerrit
• libusb_init is now deprecated Xiaofan Chen
  • Re: libusb_init is now deprecated Antonio Borneo
  • Re: libusb_init is now deprecated Xiaofan Chen
  • Re: libusb_init is now deprecated Xiaofan Chen
  • Re: libusb_init is now deprecated Xiaofan Chen
  • Re: libusb_init is now deprecated Xiaofan Chen
• [PATCH]: 99c4edea95 flash/nor/spi: Add some zbit flash chips. gerrit
• [openocd:tickets] #380 ar71xx.cfg Vitaliy
  • [openocd:tickets] #380 ar71xx.cfg Tommy Murphy
• [PATCH]: 6cee433ffc rtos/nuttx: add Espressif target support and refactoring gerrit
• official site and 0.12 release Liviu Ionescu
  • Re: official site and 0.12 release Paul Fertser
  • Re: official site and 0.12 release Liviu Ionescu
• [PATCH]: 5e622ea447 rtos: add custom stack read function gerrit
• [PATCH]: edec603660 rtos/nuttx: add stacking info for Espressif Xtensa chips gerrit
• [PATCH]: 8b8e988c3d rtos: remove config.h includes from stackings headers gerrit
• [PATCH]: 077731e590 doc:usb_adapters: add lsusb dump of esp_usb_jtag gerrit
• [PATCH]: a7e774fcd5 doc: fix broken link to IgnoreHardwareSerialNumber in README.Windows gerrit
• [PATCH]: ee4da068a2 stm32f3x: Allow overriding the flash bank size gerrit
• Ask for help with invalid evaluation of the RTT control block address Ondřej Bureš
  • Re: Ask for help with invalid evaluation of the RTT control block address Paul Fertser
• [PATCH]: 1ecc7e89e5 configure.ac: fix check for jimtcl submodule gerrit
• [PATCH]: 301cdae375 arm_adi_v5: Support reads wider than 32 bits gerrit
• [PATCH]: 33e0bf1ed8 jtag: esp_usb_jtag: remove macro __packed gerrit
• [PATCH]: e3c05d54d5 server: gdb: ignore mem read during gdb_sync gerrit
• [PATCH]: e3491f642b svf: new command line options -noreset and -addcycles gerrit
• [PATCH]: 9607eb8dfd jtagspi: add optional command during initialization gerrit
• [PATCH]: 8f2294742e jtag: rewrite commands 'jtag newtap' and 'swd newdap' as COMMAND_HANDLER gerrit
• [PATCH]: ecdd911cf6 jtag/drivers/ch341a: Added ch341a jtag driver support. gerrit
• [PATCH]: 2225b9c1ac rtt: fix corner-cases of finding control block gerrit
• [PATCH]: fad361f8f7 jtag: hla: use generic helper for commands 'jtag newtap' 'swd newdap' gerrit
• [PATCH]: 4b97631506 jtag: parse command options in 'swd newdap' gerrit
• [PATCH]: 0fe11adeda target: arc: rewrite command 'arc add-reg' as COMMAND_HANDLER gerrit
• [PATCH]: 36d1604454 helper: nvp: add openocd nvp files gerrit
• [PATCH]: 3ba582572e target: arc: rewrite command 'arc add-reg-type-flags' as COMMAND_HANDLER gerrit
• [PATCH]: e1e877cb79 target: arc: rewrite command 'arc add-reg-type-struct' as COMMAND_HANDLER gerrit
• [PATCH]: 9f13f3a853 flash/jtagspi: handle error return value gerrit
• [openocd:tickets] #379 Create custom jtag driver in openocd Ashi Gupta
  • [openocd:tickets] #379 Create custom jtag driver in openocd Tommy Murphy
  • [openocd:tickets] Re: #379 Create custom jtag driver in openocd Paul Fertser
  • [openocd:tickets] Re: #379 Create custom jtag driver in openocd Tommy Murphy
  • [openocd:tickets] #379 Create custom jtag driver in openocd Ashi Gupta
  • [openocd:tickets] #379 Create custom jtag driver in openocd Ashi Gupta
• Bug report Er.charmin Faldu
  • Re: Bug report Paul Fertser
• [openocd:tickets] #378 SWD support for RISCV artchitecture Ashi Gupta
  • [openocd:tickets] #378 SWD support for RISCV artchitecture Tommy Murphy
  • [openocd:tickets] #378 SWD support for RISCV artchitecture Ashi Gupta
  • [openocd:tickets] Re: #378 SWD support for RISCV artchitecture Tommy Murphy
  • [openocd:tickets] #378 SWD support for RISCV artchitecture Ashi Gupta
  • [openocd:tickets] Re: #378 SWD support for RISCV artchitecture Tommy Murphy
  • [openocd:tickets] #378 SWD support for RISCV artchitecture Antonio Borneo
  • [openocd:tickets] Re: #378 SWD support for RISCV artchitecture Tommy Murphy
  • RE: [openocd:tickets] Re: #378 SWD support for RISCV artchitecture Ooi, Cinly
  • [openocd:tickets] Re: #378 SWD support for RISCV artchitecture Cinly Ooi
  • [openocd:tickets] Re: #378 SWD support for RISCV artchitecture Cinly Ooi
  • [openocd:tickets] Re: #378 SWD support for RISCV artchitecture Ashi Gupta
  • [openocd:tickets] Re: #378 SWD support for RISCV artchitecture Tommy Murphy
  • [openocd:tickets] Re: #378 SWD support for RISCV artchitecture Ashi Gupta
  • [openocd:tickets] Re: #378 SWD support for RISCV artchitecture Tomas Vanek
  • [openocd:tickets] Re: #378 SWD support for RISCV artchitecture Marek Vrbka
  • RE: [openocd:tickets] #378 SWD support for RISCV artchitecture Ooi, Cinly
  • [openocd:tickets] #378 SWD support for RISCV artchitecture Antonio Borneo
  • [openocd:tickets] #378 SWD support for RISCV artchitecture Antonio Borneo
  • RE: [openocd:tickets] #378 SWD support for RISCV artchitecture Ooi, Cinly
  • [openocd:tickets] Re: #378 SWD support for RISCV artchitecture Cinly Ooi
• [openocd:tickets] #377 efm32.cfg: fail to program bc "Cortex-M PARTNO 0x3 is unrecognized" Ana Kisch
• [PATCH]: 273633c056 jtag/drivers/openjtag: fix annoying num_cycles > 16 warning gerrit
• [PATCH]: de4fe8e7d5 target/ti-cjtag: make switching to JTAG more reliable gerrit
• [PATCH]: 36d8c7f1c7 flash/nor/numicro: lint product list gerrit
• [PATCH]: cf88134f83 flash/nor/numicro: add NUC123SD4AE support gerrit
• [PATCH]: 60b5ea1ac9 flash/nor/spi: add 25pe{10/20/40/80/16} gerrit
• [PATCH]: fbd2c6f0f0 helper: Add generic little endian CRC32 function gerrit
• OpenOCD 0.12.0-rc3 is out Paul Fertser
• [PATCH]: 1ba789012a .gitignore: Add .cache and compile_commands.json gerrit
• [PATCH]: f0d2f5fac0 target: arc: rewrite command 'arc get-reg-field' as COMMAND_HANDLER gerrit
• [PATCH]: 68c85ffd37 target: arc: fix error handling in command 'arc set-reg-exists' gerrit
• [PATCH]: 1807f04295 target: arc: rewrite command 'arc jtag set-core-reg' as COMMAND_HANDLER gerrit
• [PATCH]: 774299dd90 target: arc: rewrite command 'arc jtag get-core-reg' as COMMAND_HANDLER gerrit
• [PATCH]: 76ecdd851a target: arc: rewrite command 'arc jtag set-aux-reg' as COMMAND_HANDLER gerrit
• [PATCH]: 1e71ef2eac target: arc: rewrite command 'arc num-actionpoints' as COMMAND_HANDLER gerrit
• [PATCH]: 3eceaaf709 target: arc: rewrite command 'arc jtag get-aux-reg' as COMMAND_HANDLER gerrit
• [PATCH]: 4efa8e5e87 flash/nor: add support for NXP QN908x gerrit
• TI CC Debugger with OpenOCD? Stuart Longland VK4MSL
  • Re: TI CC Debugger with OpenOCD? Michael Schwingen
• [PATCH]: 83aa545463 openocd: revert workarounds for 'expr' syntax change gerrit
• [PATCH]: d2d6c476a1 Add support for Nordic nRF9160. gerrit
• [PATCH]: 7fbb115cda jtag: fix build with configure --enable-verbose gerrit
• [openocd:tickets] #376 configure --enable-verbose triggers compilation error in arm-jtag-ew.c & opendous.c Tommy Murphy
  • [openocd:tickets] #376 configure --enable-verbose triggers compilation error in arm-jtag-ew.c & opendous.c Antonio Borneo
  • [openocd:tickets] Re: #376 configure --enable-verbose triggers compilation error in arm-jtag-ew.c & opendous.c Tommy Murphy
  • [openocd:tickets] Re: #376 configure --enable-verbose triggers compilation error in arm-jtag-ew.c & opendous.c Antonio Borneo
  • [openocd:tickets] #376 configure --enable-verbose triggers compilation error in arm-jtag-ew.c & opendous.c Antonio Borneo
• [openocd:tickets] #375 ti_cjtag.cfg: JTAG scan chain interrogation failed: all ones Phil Wiggum
  • [openocd:tickets] #375 ti_cjtag.cfg: JTAG scan chain interrogation failed: all ones Antonio Borneo
  • [openocd:tickets] #375 ti_cjtag.cfg: JTAG scan chain interrogation failed: all ones Antonio Borneo
  • [openocd:tickets] #375 ti_cjtag.cfg: JTAG scan chain interrogation failed: all ones Antonio Borneo
• [PATCH]: 7e88ae25f3 cortex_m: handle armv8m cores without security extension gerrit
• [PATCH]: 9c0e516552 flash/nor/dsp5680xx: Fix build. gerrit
• [PATCH]: 7238806b22 target: fix assert in 'monitor profile' on constant PC gerrit
• review.openocd.org issues? Jonathan McDowell
  • Re: review.openocd.org issues? Paul Fertser
  • RE: review.openocd.org issues? Tarek BOCHKATI
  • Re: review.openocd.org issues? Paul Fertser
  • Re: review.openocd.org issues? Antonio Borneo
  • Re: review.openocd.org issues? Paul Fertser
  • Re: review.openocd.org issues? Antonio Borneo
  • Re: review.openocd.org issues? Tomas Vanek
  • Re: review.openocd.org issues? Paul Fertser
• [PATCH]: 6a1963fe18 ipdbg: whitespaces gerrit
• [PATCH]: 3cc5c46a93 pld: add support for lattice certus devices gerrit
• [PATCH]: 266bfcf737 pld: add support for lattice ecp2 and ecp3 devices gerrit
• [PATCH]: 247e7f7fbf pld: add support for lattice ecp5 devices gerrit
• [PATCH]: 13ee496e54 driver: vdebug: fix mode of cmd 'vdebug mem_path' gerrit
• [PATCH]: c52e71d32c target: fix unsigned computation in 'monitor profile' gerrit
• [PATCH]: 4a37feae6a target: cortex_a: fix clang error core.CallAndMessage gerrit
• [PATCH]: 85e05cd372 arm_adi_v5: fix SIGSEGV due to failing re-examine gerrit
• JLink target power Rolf | Onethinx
  • Re: JLink target power Antonio Borneo
  • Re: JLink target power Rolf | Onethinx
• [PATCH]: 3894c5c3f9 at91samd: wait for nvm ready gerrit
• [openocd:tickets] #374 How to add a new JTAG driver support in openocd Ashi Gupta
  • [openocd:tickets] #374 How to add a new JTAG driver support in openocd Paul Fertser
  • [openocd:tickets] #374 How to add a new JTAG driver support in openocd Paul Fertser
• [PATCH]: aeb1ca08ee flash/nor/stm32l4x: Add revision 'X' and 'C' for STM32U575/585 devices gerrit
• [openocd:tickets] #373 ST-LINK V3SET fails to enter SWD Tanguy Serrat
  • [openocd:tickets] #373 ST-LINK V3SET fails to enter SWD Antonio Borneo
  • [openocd:tickets] #373 ST-LINK V3SET fails to enter SWD Tanguy Serrat
  • [openocd:tickets] #373 ST-LINK V3SET fails to enter SWD Antonio Borneo
  • [openocd:tickets] #373 ST-LINK V3SET fails to enter SWD Tanguy Serrat
  • [openocd:tickets] #373 ST-LINK V3SET fails to enter SWD Antonio Borneo
  • [openocd:tickets] #373 ST-LINK V3SET fails to enter SWD Tanguy Serrat
  • [openocd:tickets] #373 ST-LINK V3SET fails to enter SWD Tanguy Serrat
• [openocd:tickets] #372 at91samd.c should check NVM READY flag dan stahlke
  • [openocd:tickets] #372 at91samd.c should check NVM READY flag Tomas Vanek
  • [openocd:tickets] #372 at91samd.c should check NVM READY flag dan stahlke
  • [openocd:tickets] #372 at91samd.c should check NVM READY flag dan stahlke
• Working with OpenOCD using Telnet Kirill Radkin
  • Re: Working with OpenOCD using Telnet Tommy Murphy
  • Re: Working with OpenOCD using Telnet Kirill Radkin
  • Re: Working with OpenOCD using Telnet Tommy Murphy
  • Re: Working with OpenOCD using Telnet Tim Newsome
• [PATCH]: 13b2f4a881 src/target/mips_m4k.c: set missing flag in set_watchpoint gerrit
• [PATCH]: 65ffb8b27a pld: move file sanity checks to pld.c gerrit
• mips_m4k watchpoint issue. Nima.Palizban
  • Re: mips_m4k watchpoint issue. Tommy Murphy
  • RE: mips_m4k watchpoint issue. Nima.Palizban
  • Re: mips_m4k watchpoint issue. Tommy Murphy
  • RE: mips_m4k watchpoint issue. Nima.Palizban
• [PATCH]: 5940bf2ff3 remove virtex-7 devices which are not compatible gerrit
• [PATCH]: cfec56e19f add missing zynq id codes gerrit
• [no subject] Kirill Radkin
  • Re: Tim Newsome
  • Re: (Без темы) Kirill Radkin
  • Re: (Без темы) Tommy Murphy
  • Re: (Без темы) Tommy Murphy

• Earlier messages
• Later messages