On 31 January 2014 07:12, Paul Fertser <[email protected]> wrote: > Hi, > > On Thu, Jan 30, 2014 at 08:33:14PM +0000, John Leake wrote: >> I am new to OpenOCD. I too need to debug an EM357 and although SiLabs have > ... > > Please next time you post to the mailing list, quote sensibly, do not > overquote, reply inline, and please do not use format=flowed for > quotations. Otherwise reading mails with a regular MUA becomes a pain. > >> Did Brian Jones get it working in the end ? > > No idea, but please share your experience once you try it with Olimex. > >> If it is of interest there are some lockup problems with revisions A and B >> of this silicon. >> http://www.silabs.com/Support%20Documents/TechnicalDocs/EM35x-Errata.pdf > > Do you imply they might affect debugging or flash programming > procedures? >
Should not effect anyone that uses srst to reset, however the default 'cortex_m reset_config' in any efm32 scripts probably needs changing to 'vectreset' to be safe. Spen ------------------------------------------------------------------------------ WatchGuard Dimension instantly turns raw network data into actionable security intelligence. It gives you real-time visual feedback on key security issues and trends. Skip the complicated setup - simply import a virtual appliance and go from zero to informed in seconds. http://pubads.g.doubleclick.net/gampad/clk?id=123612991&iu=/4140/ostg.clktrk _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
