Hi, On Wed, Oct 01, 2014 at 10:57:25AM +0100, billium wrote: > I was using openocd with a STM32 value line discovery at the end of > August with no problems now it comes up with the following error:
Check /sys/module/usb_storage/parameters/quirks still has 483:3744:i, without it usb_storage claims the device and it becomes unusable. > add_script_search_dir /usr/share/openocd/scripts Useless, default already. > source [find board/stm32vldiscovery.cfg] Ok > init > reset init Not really needed, sometimes you want to connect to a running target. And when you're flashing from gdb "reset init" is called automatically. So basically the whole file is equivalent to calling openocd -f board/stm32vldiscovery.cfg HTH ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
