Hello, the patch "tcl: Add default hooks for STM32F3x" (8d80a25410bb76670c7fcf780b624212bd769e47) added a "mwh" access.
Running on a F334 discovery with lastest STLink firmware gives: (gdb) mon reset init Unable to match requested speed 1000 kHz, using 950 kHz Unable to match requested speed 1000 kHz, using 950 kHz adapter speed: 950 kHz target state: halted target halted due to debug-request, current mode: Thread xPSR: 0x01000000 pc: 0x08004624 msp: 0x20000608 tcl/target/stm32f3x.cfg:108: Error: in procedure 'reset' in procedure 'ocd_bouncer' in procedure 'ocd_process_reset' in procedure 'ocd_process_reset_inner' called at file "embedded:startup.tcl", line 246 in procedure 'stm32f3x.cpu' called at file "embedded:startup.tcl", line 368 in procedure 'ocd_bouncer' in procedure 'stm32f3x_default_reset_init' in procedure 'mwh' called at file "tcl/target/stm32f3x.cfg", line 108 It seems that 'mwh' access is noy supported for the STLink. Is that the case or do I something wrong? Thanks -- Uwe Bonnes [email protected] Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt --------- Tel. 06151 162516 -------- Fax. 06151 164321 ---------- ------------------------------------------------------------------------------ BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT Develop your own process in accordance with the BPMN 2 standard Learn Process modeling best practices with Bonita BPM through live exercises http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
