Il 14/06/2016 16:16, Uwe Bonnes ha scritto:
"Lorenzo" == Lorenzo Corti <[email protected]> writes:
Lorenzo> Hello, i send you the .elf file maked with
Lorenzo> arm-lancos-eabi-objcopy -O binary -R .external_flash -R
Lorenzo> .apptext Debug-EK390-0/LCDTest.elf Debug-EK390-0/ LCDTest.bin
Hello,
I will try to load to a F7(46) Discovery Board at home and will report.
Bye
With the following configuration:
STM32 STLINK Utility under Windows8 , ST Link2.1 hardware, custom board
EK390 : ok flash progammer.
OpenOCD git Version Linux ubuntu 14.04, ST Link2.1 hardware, custom
board EK390 : flash progammer doesn't work.
OpenOCD git Version Linux ubuntu 14.04, JTAGKey hardware, custom board
EK390: flash progammer doesn't work.
OpenOCD git Version Linux ubuntu 14.04, ST Link2.1 hardware, STM32F7
discovery : ok flash progammer.
We have see that openOCD has modified the option bytes.
Any ideas?
Thanks,
Lorenzo
--
*Lorenzo Corti* | Ricerca e Sviluppo
*Eurek s.r.l. *Via Celletta 8/b | 40026 Imola (BO) - Italy | +39 *0542
609120*
[email protected] <mailto:[email protected]> | www.eurek.it
<http://www.eurek.it/>
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity
planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
