Hi all, i started this discussion on the irc #openocd. As PaulFertser suggested, lets move it to the mailing list.
To make at least some of the commands more consistent, i decided to rework adapter related part. Initial patch is here: http://openocd.zylin.com/4774 Here are the old variants of adapter related commands: ftdi_location <location> interface <name> interface_list interface_name adapter_nsrst_delay adapter_nsrst_assert_width interface_transports adapter_khz here is my new: adapter usb location <location> (set usb location of usb adapter) adapter driver set <name> (select adapter driver) adapter driver get (get configured driver name) adapter driver list (list build in drivers) adapter srst delay_after (delay after srst deasserted) adapter srst width (assertion pulse width) adapter transports (set list of supported transports by adapter) adapter khz (set clock rate of TCLK line) By "adapter khz" and "adapter transports", i'm not 100% sure. For the firs one, I can imagine some thing like "adapter tclk rate <rate>". Comments, suggestions, ideas related to this topic are welcome! -- Regards, Oleksij _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
