This is an automated email from Gerrit.

"Shivasharan <shivasharan.nagali...@ti.com>" just uploaded a new patch set to 
Gerrit, which you can find at https://review.openocd.org/c/openocd/+/8771

-- gerrit

commit 9cc98504e9bd2d09fabb3519247d32696b23a5a6
Author: Shivasharan Nagalikar <shivasharan.nagali...@ti.com>
Date:   Fri Feb 21 16:31:03 2025 +0530

    tcl/board: Add TI AM263P launchpad config
    
    Add basic connection details with AM263P Launchpad
    
    For further details, see: https://www.ti.com/tool/LP-AM263P
    
    Change-Id: I7232a0b9337583eab499bc72929bd059624b4ff1
    Signed-off-by: Shivasharan Nagalikar <shivasharan.nagali...@ti.com>

diff --git a/tcl/board/ti_am263p_launchpad.cfg 
b/tcl/board/ti_am263p_launchpad.cfg
new file mode 100644
index 0000000000..96e06fab6b
--- /dev/null
+++ b/tcl/board/ti_am263p_launchpad.cfg
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+#
+# Texas Instruments AM263P Launchpad
+# https://www.ti.com/tool/LP-AM263P
+#
+
+# AM263P Launchpad has an xds110 onboard.
+source [find interface/xds110.cfg]
+
+transport select jtag
+
+# default JTAG configuration has only SRST and no TRST
+reset_config srst_only srst_push_pull
+
+# delay after SRST goes inactive
+adapter srst delay 20
+
+if { ![info exists SOC] } {
+       set SOC am263p
+}
+
+source [find target/ti_k3.cfg]
+
+adapter speed 250

-- 

Reply via email to