Hi Oyvind, I tried your patch. Unfortunately for at least my particular situation it didn't solve my problem. I did notice that the latest subversion has more logging information, however. The error output shows a few more message details then the version I was using earlier:
Info : J-Link JTAG Interface ready Info : JTAG tap: at91sam9260.cpu tap/device found: 0x0792603f (mfg: 0x01f, part: 0x7926, ver: 0x0) Info : JTAG Tap/device matched Info : accepting 'telnet' connection from 0 Error: jlink_usb_message failed with result=1) Error: jlink_tap_execute, wrong result -107 (expected 1) Info : JTAG tap: at91sam9260.cpu tap/device found: 0x0792603f (mfg: 0x01f, part: 0x7926, ver: 0x0) Info : JTAG Tap/device matched Error: jlink_usb_message failed with result=1) Error: jlink_tap_execute, wrong result -107 (expected 1) Warn : WARNING: unknown debug reason: 0x0 Error: invalid mode value encountered 0 Error: cpsr contains invalid mode value - communication failure I just started looking at in more detail. Gary Gary Carlson Gary Carlson, MSEE Principal Engineer Carlson-Minot Inc. On 7/7/09 8:42 AM, "Øyvind Harboe" <[email protected]> wrote: > Here is a patch of suggested modification, no longer > take current reset_config state into account. > > _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
