Updated to the latest (git describe):
0.2.0-387-g3b95d0e
No difference in the behavior.
I did notice that if I run this:
proc jtag_init {} {
jtag arp_init-reset
}
It works (ie, initial scan chain works).
However this:
proc jtag_init {} {
#Make sure we reset the hardware before we talk to it
if { [info exists RESET_ON_INIT ] }{
puts "nSRST & nTRST asserted via jtag_init proc()"
jtag arp_init-reset
}
}
does not work. It looks like the 'if' statement break things. It does
not matter whether RESET_ON_INIT is defined or not.
I run openocd with:
./openocd -c 'interface dummy' -f telo.cfg -c "set RESET_ON_INIT 1"
--debug 3
What I ended up doing is removing the reset_init{} code and running this
command (when I need to reset the JTAG before init. scan chain).
./openocd -f olimex-arm-usb-ocd.cfg -f telo.cfg -c "proc jtag_init {}
{jtag arp_init-reset}"
On Mon, 2009-10-19 at 12:03 +0200, Øyvind Harboe wrote:
> I'm not able to reproduce the problem.
>
> Could you provide more detailed steps?
>
> (you're using latest out of git are you not?)
>
> On Mon, Oct 19, 2009 at 7:50 AM, michal
>
>
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
