Hi David,
> However: did you check the buffer to see if it had the right data?
> What I saw was the right data in the buffer...
The fail is in this code:
/* MCR p14,0,R0,c0,c5,0 */
retval = arm11_run_instr_data_from_core(arm11, 0xEE000E15, &r0,
1);
if (retval != ERROR_OK)
return retval;
if (address + size * count != r0)
{
LOG_ERROR("Data transfer failed. Expected end "
"address 0x%08x, got 0x%08x",
(unsigned) (address + size * count),
(unsigned) r0);
if (burst)
LOG_ERROR("use 'arm11 memwrite burst disable'
to disable fast burst mode");
if (arm11_config_memwrite_error_fatal)
return ERROR_FAIL;
}
and r0 has the wrong value. The expected part (address + size * count)
is correct.
Regards,
Edgar
--
Edgar Grimberg
System Developer
Zylin AS
ZY1000 JTAG Debugger http://www.zylin.com/zy1000.html
Phone: (+47) 51 63 25 00
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
