On Fri, 2007-01-12 at 11:42 +0100, Alain NAKACHE wrote: > Dear all, > > I'm very disapointed since my several attempts to send a fax with TxFAX > have failed. > > Here is my config : > - OpenPBX.org 1.2-RC3 > - spandsp-20070105 (same result with spandsp 0.0.3pre27) > - libtiff 3.8.2 > - zaptel 1.4.0 > - libpri 1.4.0 > - Hardware : Digium card TE210P (2 T1/E1 - used with 1 E1) > - OS : CentOS 4.4 > - Platform : Intel(R) Pentium(R) III -1133MHz with 1Gb RAM > > > I try to send with a call file a follow : > <snip> > Channel: Zap/g1/0426682409 > CallerID: ALINTO <426680953> > MaxRetries: 3 > WaitTime: 20 > retryTime: 5 > SetVar: LOCALHEADERINFO=Il faut beau et chaud > SetVar: LOCALSTATIONID=BEAUCHAUD-426680953 > Application:TxFAX > Data:/var/tmp/lisa.tifg4|caller|ecm|debug > </snip> > > The called fax is an Audiocodes Mediant 2000 but same results are > obtained with an HP multifonction printer through a PSTN line. > > Log result (full.txt.bz2) is joined to this mail . > > Can you help me to find where is the problem.
Look at /proc/interrupts and make sure the card isn't sharing an IRQ, if it is, move it to a different slot. Try with the latest SVN. Try without |ecm. Try without LOCALSTATIONID and LOCALHEADERINFO. Try increasing WaitTime. Try TxFAX -> RxFAX. > Thanks > Alain Good luck Damjan -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. _______________________________________________ Openpbx-users mailing list [email protected] http://lists.openpbx.org/mailman/listinfo/openpbx-users
