Bartek Kania a écrit :
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Fri, 2007-01-12 at 11:42 +0100, Alain NAKACHE wrote:
Look at /proc/interrupts and make sure the card isn't sharing an IRQ, if
it is, move it to a different slot.
Try with the latest SVN.
Try without |ecm.
Try without LOCALSTATIONID and LOCALHEADERINFO.
Try increasing WaitTime.
Try TxFAX -> RxFAX.
Also try to setting the PCI-latency of all other cards to 0.
this can be done with setpci.
I've had one box with near 100% success-ratio when pci latency on all
cards was set to 0, except for the E1-card which was set to 255 while
the default pci config on the same box gave me about 50% success
ratio.
/B
Done it but same result :
# lspci -vv
00:00.0 Host bridge: Broadcom CNB20LE Host Bridge (rev 06)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0, Cache Line Size 08
00:00.1 Host bridge: Broadcom CNB20LE Host Bridge (rev 06)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size 08
00:02.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
(prog-if 00 [VGA])
Subsystem: Compaq Computer Corporation Proliant Rage XL
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (2000ns min), Cache Line Size 08
Interrupt: pin A routed to IRQ 169
Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 1000 [size=256]
Region 2: Memory at b1000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:03.0 System peripheral: Compaq Computer Corporation Advanced System
Management Controller
Subsystem: Compaq Computer Corporation: Unknown device b0f3
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 177
Region 0: I/O ports at 1400 [size=256]
Region 1: Memory at b1200000 (32-bit, non-prefetchable) [size=256]
00:0f.0 ISA bridge: Broadcom OSB4 South Bridge (rev 51)
Subsystem: Broadcom OSB4 South Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:0f.1 IDE interface: Broadcom OSB4 IDE Controller (prog-if 8a [Master
SecP PriP])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at 1800 [size=16]
00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 04)
(prog-if 10 [OHCI])
Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (20000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 185
Region 0: Memory at b1100000 (32-bit, non-prefetchable) [size=4K]
01:01.0 Communication controller: Digium, Inc. Wildcard TE210P (rev 02)
Subsystem: Unknown device 0003:0000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 255
Interrupt: pin A routed to IRQ 193
Region 0: Memory at d0400000 (32-bit, non-prefetchable) [size=128]
01:03.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro
100] (rev 08)
Subsystem: Compaq Computer Corporation NC3163 Fast Ethernet NIC
(embedded, WOL)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (2000ns min, 14000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 201
Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at b000 [size=64]
Region 2: Memory at d0000000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
01:04.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro
100] (rev 08)
Subsystem: Compaq Computer Corporation NC3163 Fast Ethernet NIC
(embedded, WOL)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (2000ns min, 14000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 209
Region 0: Memory at d0300000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at b040 [size=64]
Region 2: Memory at d0100000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
01:05.0 IDE interface: Silicon Image, Inc. SiI 0649 Ultra ATA/100 PCI to
ATA Host Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Compaq Computer Corporation: Unknown device 0045
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 217
Region 0: I/O ports at b090 [size=8]
Region 1: I/O ports at b0a0 [size=4]
Region 2: I/O ports at b098 [size=8]
Region 3: I/O ports at b0a4 [size=4]
Region 4: I/O ports at b080 [size=16]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=3 PME-
_______________________________________________
Openpbx-users mailing list
[email protected]
http://lists.openpbx.org/mailman/listinfo/openpbx-users
