HI, Thanks for the information, I'll try it. Which Patton model is known to work?
Jon -----Original message----- From: [EMAIL PROTECTED] Date: Fri, 09 Mar 2007 12:42:02 -0500 To: "'OpenPBX.org Users Mailing List - Non-Commercial Discussion'"[email protected] Subject: Re: [Openpbx-users] OpenPBX as T.38 PSTN gateway > The SPA2102 have bad T.38 support. Try Patton or other ATA with correct > T.38. > > turby > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Jbebeau > Sent: Friday, March 09, 2007 5:31 PM > To: OpenPBX.org Users Mailing List - Non-Commercial Discussion > Subject: Re: [Openpbx-users] OpenPBX as T.38 PSTN gateway > > Hi Mike, > > I had exactly the same idea for what I suspect is the same "problem" your > having - no T.38 gateway in Asterisk. > > I spent a good bit of time researching and testing with OpenPBX head, and > SPA2102 (ATA devices) without a solution. > > It seems folks on the list are able to support inbound (from the PSTN) to > the ATA device. My problem is starting an outbound fax from a physical fax > machine, thru the ATA and over IP to a PSTN Gateway - OpenPBX with a Sangoma > T1-PRI for PSTN. > > The session starts out ok and OpenPBX converts to a T.38 (using > T38Gatewway()) but I get blasts of errors in the OpenPBX log and a digital > sounding signal over the PSTN connection until things time out. > > You idea is sound...of course, I had the same idea. I'd sure like to work > with who ever is able to help resolve the problem - things *almost* work. > In the meantime, I setting up a Cisco 2811 CCME/K9 with a multiflex T1 for > the PSTN, just for the fax traffic. > > Jon > > -----Original message----- > From: Mike Clark [EMAIL PROTECTED] > Date: Fri, 09 Mar 2007 09:23:35 -0500 > To: "OpenPBX.org Users Mailing List - Non-Commercial > Discussion"[email protected] > Subject: [Openpbx-users] OpenPBX as T.38 PSTN gateway > > > We would definitely like to start using T.38. Is OpenPBX as a T.38 > > PSTN gateway ready for light production? > > > > What we want to do is have a gateway server with a Sangoma T1 card > > that is connected to a PRI from the telco. Voice calls will be routed > > off to another OpenPBX or Asterisk PBX and fax would be handled by the > gateway. > > Anyone doing this in production now? > > > > Thanks, > > > > Mike Clark > > _______________________________________________ > > Openpbx-users mailing list > > [email protected] > > http://lists.openpbx.org/mailman/listinfo/openpbx-users > _______________________________________________ > Openpbx-users mailing list > [email protected] > http://lists.openpbx.org/mailman/listinfo/openpbx-users > > _______________________________________________ > Openpbx-users mailing list > [email protected] > http://lists.openpbx.org/mailman/listinfo/openpbx-users _______________________________________________ Openpbx-users mailing list [email protected] http://lists.openpbx.org/mailman/listinfo/openpbx-users
