Im using Singularity viewer in all test.
2013/10/23 Chris <[email protected]> > I tested with protocol v0.1 for a few hours and I was unable to reproduce > any of the side effects mentioned except for the > rapid-region-cross-back-and-**forth issue which I believe has been > present since before the introduction of v0.2. I do see Luisillo's issue > on v0.2 in a slightly different manner; the attachments remain on the > avatar, but can't do anything with them (scripts don't work, can't detach > them, can't attach any thing additional, etc) until relog. > > Had a look over the mantis, it seems to be from how it's explained, a > slightly different issue from what I'm experiencing since the majority of > the mantis is done hypergrid, but that is just my thoughts. It could be > directly related and I'm just seeing different side effects. I do see the > error sometimes as shown here http://opensimulator.org/** > mantis/file_download.php?file_**id=3595&type=bug<http://opensimulator.org/mantis/file_download.php?file_id=3595&type=bug> > > Currently I am running in standalone non hypergrid on Phoenix Viewer 1600 > and have not tested yet to see if it shows up on other viewers or not. > > On 10/22/2013 6:49 PM, Justin Clark-Casey wrote: > >> OpenSimulator 0.7.6 introduces a new default teleport protocol which >> should be more efficient (it better matches how Linden Lab does this) but >> invevitably has different characteristics than the older protocol. >> >> If you're in control of all the simulators where you see this problem, I >> would be interested in knowing what happens if you force teleports to use >> the older protocol instead (0.7.6 retains this so that it's still possible >> to teleport with older OpenSimulator versions). Instructions for this are >> now at [1] >> >> However, region cross should have been unaffected by this as it doesn't >> interact with teleport though there's always the possibility of indirect >> interactions. >> >> You may also want to review the long mantis at [2]. >> >> [1] >> http://opensimulator.org/wiki/**Teleports#Configuration<http://opensimulator.org/wiki/Teleports#Configuration> >> [2] >> http://opensimulator.org/**mantis/view.php?id=6755<http://opensimulator.org/mantis/view.php?id=6755> >> >> On 21/10/13 16:27, Luisillo Contepomi wrote: >> >>> I confirm on Linux 64 and windows 7 -64 Grid with (Robust, MySQL in the >>> same server as regions). >>> >>> And let me add to your list: >>> >>> *prims attached lost (in inventory are as worn but you can not see it >>> really worn and you can not undress from >>> inventory (as example hair). >>> This is totally aleatory, sometimes occurs but not always. I can not >>> reproduce it. For this I have not reported in mantis. >>> Regards >>> >>> >>> 2013/10/21 Chris <[email protected] <mailto:[email protected]>> >>> >>> Hello all, >>> >>> I'm running 0.7.6 at commit 8996ac1 and am noticing a few issues >>> that show up after several TP attempts. Whenever I >>> teleport around several times between regions there some random side >>> effects that sometimes trigger after the >>> teleport is complete. The side effects that happen after the >>> teleport issue is triggered seem non related to each >>> other so the best I can do is put what I see happening in a short >>> list; one or more of these side effects may show up: >>> >>> * Scripts in some or all attachments get completely reset upon TP >>> completion >>> >>> * Scripts in attachments freeze and are unresponsive and then some >>> or all of them get completely reset upon relog >>> >>> * Teleports do not complete or take a very long time to complete >>> >>> * After TP completion surrounding regions disappear and it is >>> impossible to access them until relog (Sometimes takes >>> a couple relogs for the region(s) to come back into view). >>> >>> * If doing a region cross (as opposed to direct teleport) all (or >>> the majority of) attachments disappear and the >>> avatar drifts or walks endlessly into the void requiring a relog >>> (This one is harder to trigger; it requires >>> rapidly crossing region borders. It's easier to see this issue if >>> you have 4 regions connected together in a square >>> grid fashion, go to the center of the 4 regions, and fly around its >>> center in a circle, rapidly crossing the borders >>> until the issue is triggered. The presence of attachments (scripted >>> or non-scripted) do not seem to matter; was able >>> to trigger it in this fashion either way) >>> >>> These issues seem to come up most often when using the map or tp >>> lure to teleport around to various regions; >>> especially when traveling to other regions that are not adjacent to >>> one another (i.e. teleporting to regions that >>> are say 2 or 3 (or more) spaces apart from each other). It's very >>> inconsistent as to when it is triggered but I've >>> been able to successfully get one or more of the side effects to >>> come about after a couple minutes of teleporting >>> about (within approximately 5 - 10 teleports). >>> >>> The presence of sleeps used with a timer event with in attachments >>> seem to exacerbate it and make it show up a bit >>> more often but it doesn't necessarily seem to be a key point in >>> triggering the issue. Changed event firing on >>> CHANGED_REGION also seem to make it show up a bit more often. >>> Although both of these may just be my imagination =) >>> but it seems to work out that way more often than not. >>> >>> The script freezes and/or state reset issues seem to be what I see >>> most often after the TP issue is triggered. >>> >>> These are the only relevant messages I could find in my log when the >>> issue is triggered: >>> >>> 15:55:32,341 WARN - OpenSim.Region.CoreModules.__** >>> Framework.EntityTransfer.__**EntityTransferModule [ENTITY TRANSFER >>> MODULE]: Region Test Region 3 did not accept Test User >>> 3557bf78-5e34-4e6c-b37c-__**2a5a8527e3e2: Failed to verify user >>> presence in the grid for Test User, access denied to region Test >>> Region 3. >>> >>> and >>> >>> 16:55:32 - [SCENE PRESENCE]: Did not find presence with id >>> 3557bf78-5e34-4e6c-b37c-__**2a5a8527e3e2 in Region 6 before >>> timeout >>> 16:55:32 - [ENTITY TRANSFER MODULE]: UpdateAgent failed on teleport >>> of Test User to Region 6 Keeping avatar in Test >>> Region 2 >>> >>> I am testing with script strategy set to abort. I have tried to test >>> with co-op but I keep getting a rash of could >>> not start script errors for scripted attachments advising me to >>> either delete the scripts in ScriptEngines or set >>> DeleteScriptsOnStartup to true, both of which I have tried several >>> times and restarted OpenSim but the error >>> messages keep persisting. Setting AppDomainLoading to true or false >>> does not seem to make a difference either. So >>> basically I am unable to test with script strategy set to co-op. >>> >>> Apologies if this seems broken up or scatter-brained but since this >>> issue results in multiple random side effects >>> it's a bit hard for me to put it all into a concise easy to read and >>> follow explanation. >>> >>> Is any one else experiencing this? >>> >>> Thanks! >>> >>> -- >>> OpenSim: 10 Region Standalone on 0.7.6 Dev >>> Physics: Open Dynamics Engine >>> OS: Windows 7 (x64) >>> CPU: AMD Phenom II X4 840 3.2 GHz >>> Memory: 11 GB DDR3 >>> Database: MySQL 5.1.63 (x64) >>> >>> ______________________________**___________________ >>> Opensim-users mailing list >>> [email protected] <mailto:Opensim-users@lists.** >>> berlios.de <[email protected]>> >>> >>> https://lists.berlios.de/__**mailman/listinfo/opensim-users<https://lists.berlios.de/__mailman/listinfo/opensim-users>< >>> https://lists.berlios.de/**mailman/listinfo/opensim-users<https://lists.berlios.de/mailman/listinfo/opensim-users> >>> **> >>> >>> >>> >>> >>> ______________________________**_________________ >>> Opensim-users mailing list >>> [email protected] >>> https://lists.berlios.de/**mailman/listinfo/opensim-users<https://lists.berlios.de/mailman/listinfo/opensim-users> >>> >>> >> >> > > -- > OpenSim: 10 Region Standalone on 0.7.6 Dev > Physics: Open Dynamics Engine > OS: Windows 7 (x64) > CPU: AMD Phenom II X4 840 3.2 GHz > Memory: 11 GB DDR3 > Database: MySQL 5.1.63 (x64) > > ______________________________**_________________ > Opensim-users mailing list > [email protected] > https://lists.berlios.de/**mailman/listinfo/opensim-users<https://lists.berlios.de/mailman/listinfo/opensim-users> >
_______________________________________________ Opensim-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/opensim-users
