Can you check with headphones each of the output ports? Perhaps your
have a bad connection? Everything else looks good, and I find it hard
to believe you don't hear *anything* at all.
The other thing you could is try turning on the monitor gain (say
"mixerctl -c monitor-gain -w 75") and plug in a microphone. If you
can't hear your microphone on the speakers, then it is probably a bum
set of speakers or bum hardware. (Monitor gain support requires really
no interaction from the driver, except the initial programming to set it
up.)
- Garrett
Enda O'Connor wrote:
> Hi
> So prtconf shows driver attached, audiotest shows that all is ok etc,
> but literally there is no sound what so ever coming from the box, dead
> silence. Not familiar with a "boomer" though.
>
>
> root at kilcolgan:~# cat /dev/sndstat
> SunOS Audio Framework
>
> Audio Devices:
> 0: audiohd#0 Intel HD Audio, ICH9 (DUPLEX)
>
> Mixers:
> 0: audiohd#0 Intel HD Audio, ICH9
> Realtek HD codec: ALC888
>
>
>
> root at kilcolgan:~# audiotest
> Sound subsystem and version: SunOS Audio 4.0 (0x00040003)
> Platform: SunOS 5.11 snv_123 i86pc
>
> *** Scanning sound adapter #1 ***
> /dev/sound/audiohd:0dsp (audio engine 0): audiohd#0
> - Performing audio playback test...
> <left> ................OK
> <right> ...............OK
> <stereo> ..............OK
> <measured sample rate 47933.00 Hz (-0.14%)>
>
> *** All tests completed OK ***
>
>
> root at kilcolgan:~# mixerctl -C
> DEVICE CONTROL VALUE POSSIBLE
> audiohd#0 volume 100 0-100
> audiohd#0 front 100:100 0-100:0-100
> audiohd#0 center 100 0-100
> audiohd#0 lfe 100 0-100
> audiohd#0 rear 100:100 0-100:0-100
> audiohd#0 surround 100:100 0-100:0-100
> audiohd#0 headphones 100:100 0-100:0-100
> audiohd#0 mic 50:50 0-100:0-100
> audiohd#0 line-in 50:50 0-100:0-100
> audiohd#0 monitor-gain 0:0 0-100:0-100
> audiohd#0 record-source mic line-in,mic
> root at kilcolgan:~#
>
> thanks for looking at this.
> Enda
> Garrett D'Amore wrote:
>> So I've heard that Ultra 24 works well with Boomer. I don't have one
>> personally to test...
>>
>> What exactly do you mean by "audio not working"?
>>
>> Do you have any other audio devices (USB audio) on the system? ("cat
>> /dev/sndstat" can be used to confirm.)
>>
>> -- Garrett
>>
>> Enda O'Connor wrote:
>>>
>>>
>>> -------- Original Message --------
>>> Subject: Re: [install-discuss] audio not working on 118
>>> Date: Thu, 17 Sep 2009 06:25:21 -0700 (PDT)
>>> From: Enda <Enda.Oconnor at Sun.COM>
>>> To: install-discuss at opensolaris.org
>>>
>>> Hi
>>> on build 123 now and nothing obvious wrong, hope someone can look at
>>> this and advise what might be the problem.
>>>
>>> root at kilcolgan:~# prtconf -vD | grep audio
>>> pci108e,5351, instance #0 (driver name: audiohd)
>>> name='audiohd_beep' type=int items=1
>>> dev_link=/dev/sound/audiohd:0mixer
>>> dev_link=/dev/sound/audiohd:0dsp
>>> dev_path=/pci at 0,0/pci108e,5351 at 1b:sound,audio0
>>> dev_link=/dev/sound/audiohd:0
>>> dev_path=/pci at 0,0/pci108e,5351 at 1b:sound,audioctl0
>>> dev_link=/dev/sound/audiohd:0ctl
>>> root at kilcolgan:~#
>>> /usr/X11/bin/scanpci -v shows
>>>
>>> pci bus 0x0000 cardnum 0x1b function 0x00: vendor 0x8086 device 0x293e
>>> Intel Corporation 82801I (ICH9 Family) HD Audio Controller
>>> CardVendor 0x108e card 0x5351 (Sun Microsystems Computer Corp., Card
>>> unknown)
>>> STATUS 0x0010 COMMAND 0x0046
>>> CLASS 0x04 0x03 0x00 REVISION 0x02
>>> BIST 0x00 HEADER 0x00 LATENCY 0x00 CACHE 0x08
>>> BASE0 0xf9ff4000 SIZE 16384 MEM
>>> BASEROM 0x00000000 addr 0x00000000
>>> MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x04
>>>
>>> root at kilcolgan:~# prtdiag
>>> System Configuration: Sun Microsystems Ultra 24
>>
>
