30.10.2015 00:29, Misha Komarovskiy пишет: > Hello Matwey, > > On Thu, Oct 29, 2015 at 11:28 PM, Matwey V. Kornilov > <[email protected]> wrote: >> 28.10.2015 19:11, Misha Komarovskiy пишет: >>> Hello Matwey, >>> >>> On Wed, Oct 28, 2015 at 11:31 AM, Matwey V. Kornilov >>> <[email protected]> wrote: >>>> 27.10.2015 22:43, Misha Komarovskiy пишет: >>>>> >>>>> Hello Matwey, >>>>> >>>>> On Tue, Oct 27, 2015 at 9:52 PM, Matwey V. Kornilov >>>>> <[email protected]> wrote: >>>>>> >>>>>> 27.10.2015 11:04, Guillaume Gardet пишет: >>>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> Le 26/10/2015 19:52, Matwey V. Kornilov a écrit : >>>>>>>> >>>>>>>> Hello, >>>>>>>> >>>>>>>> Why bootmenu command is not used atm? Are there any reasons? >>>>>>>> >>>>>>> >>>>> >>>>> You mean ansi bootmenu? If yes, ac100 community member tried to enable >>>>> it for our board, >>>>> but extlinux.conf was proposed as better solution, here is link >>>>> http://patchwork.ozlabs.org/patch/450122/ >>>>> >>>>> I tried to use extlinux.conf with openSUSE on Chromebook Snow, >>>>> because its support already enabled there, and it work flawlessly and >>>>> very flexible, >>>>> take a look at README.distro in u-boot repo, also as it is same as pxe >>>>> config file kiwi probably already have >>>>> support for it. >>>>> >>>>> Here is example of my test extlinux.conf: >>>>> >>>>> TIMEOUT 1000 >>>>> ONTIMEOUT localboot >>>>> DEFAULT default >>>>> MENU TITLE Boot menu >>>>> PROMPT 0 >>>>> >>>>> LABEL default >>>>> MENU LABEL Default >>>>> LINUX /boot/zImage >>>>> FDT /boot/dtb/exynos5250-snow.dtb >>>>> INITRD /boot/initrd >>>>> APPEND root=/dev/disk/by-id/mmc-SL08G_0x01978580-part3 >>>>> loader=uboot disk=/dev/disk/by-id/mmc-SL08G_0x01978580 >>>>> resume=/dev/disk/by-id/mmc-SL08G_0x01978580-part4 plymouth.enable=0 >>>>> console=ttySAC3,115200n8 console=tty >>>>> >>>>> LABEL failsafe >>>>> MENU LABEL Failsafe >>>>> LINUX /boot/zImage-4.1.5-exynos_defconfig >>>>> FDT /boot/dtb/exynos5250-snow.dtb >>>>> INITRD /boot/initrd-4.1.5-exynos_defconfig >>>>> APPEND root=/dev/disk/by-id/mmc-SL08G_0x01978580-part3 >>>>> loader=uboot disk=/dev/disk/by-id/mmc-SL08G_0x01978580 >>>>> resume=/dev/disk/by-id/mmc-SL08G_0x01978580-part4 plymouth.enable=0 >>>>> console=ttySAC3,115200n8 console=tty >>>>> >>>>> LABEL localboot >>>>> MENU LABEL Local boot script (boot.scr) >>>>> LOCALBOOT 1
Ok, I've just checked how extlinux works on my BBB. It works. -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
