Cool, If I can get this to work without the additional I/O hardware that's coming, I'll give that a go.
Tony On Mon, Oct 17, 2016 at 9:31 AM, Andreas Färber <afaer...@suse.de> wrote: > Am 16.10.2016 um 00:00 schrieb Andreas Färber: >> Note that there is no .dts file for the Pi Zero in the v4.7 kernel: >> http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts?h=v4.7 >> Only v4.9 will have it. Not sure how our U-Boot version handles that. >> Can you press a key to get a U-Boot prompt, then enter "printenv >> fdtfile" and share the output? > > U-Boot> printenv fdtfile > fdtfile=bcm2835-rpi-zero.dtb > > bcm2835-rpi-zero.dtb doesn't exist in dtb-bcm2835 4.7, leading to: > > libfdt fdt_check_header(): FDT_ERR_BADMAGIC > > before it enters GRUB with my modified image or runs our boot.scr with > the official image. > > > The workaround then is very easy: > > a) Interrupt U-Boot and manually load an existing .dtb file: > > load mmc 0:2 $fdt_addr_r dtb/bcm2835-rpi-b-plus.dtb > > or with my experimental GRUB based image boot/dtb/bcm2835-rpi-b-plus.dtb > > b) Create a bcm2835-rpi-zero.dtb symlink to that file: > > cd /boot/dtb > ln -s bcm2835-rpi-b-plus.dtb bcm2835-rpi-zero.dtb > > This step may need to be repeated after zypper up/dup installs new > dtb-bcm2835 packages. > > If you create the symlink on your host, you can skip step a). > > Eh voilà, you get a booting Tumbleweed system. > > Regards, > Andreas > > -- > SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany > GF: Felix Imendörffer, Jane Smithard, Graham Norton > HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org