After some time, the ethernet leds begin to blink, but no requests to dhcp. something is alive inside still...
2017-09-04 11:17 GMT+03:00 Matwey V. Kornilov <[email protected]>: > Hm, console=ttyS2,1500000 supposed to work, but it doesnt... > > 2017-09-04 11:00 GMT+03:00 Matwey V. Kornilov <[email protected]>: >> Booting a command list >> >> Loading linux.vmx... >> Loading initrd.vmx... >> EFI stub: Booting Linux Kernel... >> EFI stub: EFI_RNG_PROTOCOL unavailable, no randomness supplied >> EFI stub: ERROR: Could not determine UEFI Secure Boot status. >> EFI stub: Using DTB from configuration table >> EFI stub: Exiting boot services and installing virtual address map... >> >> Hm... Seems to be no consoie from the kernel >> >> 2017-09-02 13:29 GMT+03:00 Matwey V. Kornilov <[email protected]>: >>> 2017-09-02 13:25 GMT+03:00 Andreas Färber <[email protected]>: >>>> Hi, >>>> >>>> Am 02.09.2017 um 12:06 schrieb Matwey V. Kornilov: >>>>> 1. Tools from https://github.com/rockchip-linux/rkbin are required to >>>>> prepare u-boot binary to be deployed into sd-card. The tools are >>>>> permitted to be redistributed, but they are x86_64-only binary blobs. >>>>> I think we could package them in RPM package and wrap them using >>>>> qemu-linux-x86_64 to execute them at JeOS building phase (at aarch64 >>>>> architecture). >>>> >>>> Negative. Same topic came up for Amlogic, and I had to develop the >>>> native Open Source meson-tools instead. >>>> >>>> For creating a JeOS image we need to use U-Boot SPL, which as I already >>>> pointed out should avoid all those binary-only x86 tools. >>>> >>>> If that is not working yet (you did not say), then we can just document >>>> the x86-only steps to keep them out of OBS. >>>> >>> >>> Well, I didn't find any U-Boot SPL implementation for RK3328 in any >>> u-boot trees. That is the issue currently. >>> >>>>> 2. bootloader are required to be placed at +16MB offset from the >>>>> beginning of SD card. We have to find a way to specify KIWI to place >>>>> EFI partition not at 2048sector as default. >>>> >>>> Yousaf gave a presentation on how to accomplish that for RK3399. >>>> >>>> If this reservation is implemented, then similar to my JeOS-nanopik2 >>>> image we could just leave out U-Boot and give users Wiki instructions on >>>> how to place U-Boot there themselves. >>>> >>>> You had forgotten to create an HCL Wiki page - I stubbed one out: >>>> >>>> https://en.opensuse.org/HCL:Rock64 >>>> >>>> Regards, >>>> Andreas >>>> >>>> -- >>>> SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany >>>> GF: Felix Imendörffer, Jane Smithard, Graham Norton >>>> HRB 21284 (AG Nürnberg) >>> >>> >>> >>> -- >>> With best regards, >>> Matwey V. Kornilov >> >> >> >> -- >> With best regards, >> Matwey V. Kornilov > > > > -- > With best regards, > Matwey V. Kornilov -- With best regards, Matwey V. Kornilov -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
