Hi, Am 02.09.2017 um 12:06 schrieb Matwey V. Kornilov: > 1. Tools from https://github.com/rockchip-linux/rkbin are required to > prepare u-boot binary to be deployed into sd-card. The tools are > permitted to be redistributed, but they are x86_64-only binary blobs. > I think we could package them in RPM package and wrap them using > qemu-linux-x86_64 to execute them at JeOS building phase (at aarch64 > architecture).
Negative. Same topic came up for Amlogic, and I had to develop the native Open Source meson-tools instead. For creating a JeOS image we need to use U-Boot SPL, which as I already pointed out should avoid all those binary-only x86 tools. If that is not working yet (you did not say), then we can just document the x86-only steps to keep them out of OBS. > 2. bootloader are required to be placed at +16MB offset from the > beginning of SD card. We have to find a way to specify KIWI to place > EFI partition not at 2048sector as default. Yousaf gave a presentation on how to accomplish that for RK3399. If this reservation is implemented, then similar to my JeOS-nanopik2 image we could just leave out U-Boot and give users Wiki instructions on how to place U-Boot there themselves. You had forgotten to create an HCL Wiki page - I stubbed one out: https://en.opensuse.org/HCL:Rock64 Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
