Op maandag 4 september 2017 14:28:24 CEST schreef u: > On 04.09.17 11:49, Freek de Kruijf wrote: > > I used the latest JeOS image 2017.05.23-Build1.1 for the RPi1 (armv6l) on > > a SD card and booted the system, which went OK. > > > > After that I did a "zypper dup --no-recommends" on that system which, at > > the end, shows the following message: > > > > Output of grub2-arm-uboot-2.02-6.1.armv6hl.rpm %posttrans script: > > update-bootloader: 2017-09-04 11:31:09 <3> update-bootloader-1244 > > > > run_command.274: '/usr/lib/bootloader/grub2-efi/install' failed with exit > > code> > > 1, output: > > <<<<<<<<<<<<<<<< > > target = arm-efi > > ls: cannot access '/sys/firmware/efi/efivars': No such file or > > directory > > + /usr/sbin/grub2-install --target=arm-efi --no-nvram --removable > > Installing for arm-efi platform. > > Can you try to run this command on its own? If it still fails, run it > with strace -f and upload the output somewhere (or look at it and search > for failures)? > > Thanks! > > Alex
The RPi1 is not EFI system, so I wonder why the target should be arm-efi. # /usr/sbin/grub2-install --target=arm-efi --no-nvram --removable Installing for arm-efi platform. /usr/sbin/grub2-install: error: cannot find a GRUB drive for /dev/mmcblk0p2. Check your device.map. # more /boot/grub2/device.map (hd0) /dev/disk/by-id/mmc-SDC_0x49910339 # ls /dev/disk/by-id/ mmc-SDC_0x49910339 mmc-SDC_0x49910339-part1 mmc-SDC_0x49910339-part2 mmc- SDC_0x49910339-part3 When running yast in ncurses to change the bootloader without any update I also get the same error message: Error Execution of command "[["/usr/bin/grub2-editenv", "list"]]" failed. Exit code: 1 Error output: /usr/bin/grub2-editenv: error: cannot find a GRUB drive for / dev/mmcblk0p2. Check your device.map. I am able to continue and I get the default "GRUB for EFI", which I change for GRUB2 After that I get the message: Error Internal error. Please report a bug report with logs. Run save_y2logs to get complete logs. Details: unsuported architecture arm Caller: /usr/share/YaST2/lib/bootloader/stage1_proposal.rb:266:in `block in <class:Stage1Proposal>' Obviously the architecture is armv6l. Submitted bug#1057142: https://bugzilla.opensuse.org/show_bug.cgi?id=1057142 -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
