Op dinsdag 5 september 2017 22:41:54 CEST schreef Freek de Kruijf: > Op dinsdag 5 september 2017 14:00:33 CEST schreef Andreas Färber: > > Am 05.09.2017 um 12:11 schrieb Freek de Kruijf: > > > Op dinsdag 5 september 2017 08:53:02 CEST schreef Freek de Kruijf: > > >> Op maandag 4 september 2017 14:28:24 CEST schreef u: > > >>> On 04.09.17 11:49, Freek de Kruijf wrote: > > >>>> I used the latest JeOS image 2017.05.23-Build1.1 for the RPi1 > > >>>> (armv6l) > > >>>> on > > >>>> a SD card and booted the system, which went OK. > > >>>>
I repeated these steps, but now I only tried to update kernel-default using zypper which pulled in two other packages, wireless-regdb and crda. There were no error messages. However a reboot did not succeed. The system could not find an extX file system with a certain UUID. So I put the SD card in my desktop and used fdisk to list the structure. This structure is totally wrong. See below: # fdisk -l /dev/sde Disk /dev/sde: 3.7 GiB, 3991928832 bytes, 7796736 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: FF922924-6706-4675-8AED-BB4E3FC84450 Device Start End Sectors Size Type /dev/sde1 2048 67587 65540 32M EFI System /dev/sde2 69632 509955 440324 215M Microsoft basic data /dev/sde3 512000 6763365 6251366 3G Microsoft basic data /dev/sde4 6764544 7796702 1032159 504M Microsoft basic data Only the first partition sde1 can be mounted. the last one sde4 is a swap partition. The error message when mounting sde2 or sde3 is: wrong fs type, bad option, bad superblock on /dev/sdeX, missing codepage or helper program, or other error. Bug in dracut? -- fr.gr. Freek de Kruijf member openSUSE -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
