On Dienstag, 5. September 2017 08:53:02 CEST Freek de Kruijf wrote: > Op maandag 4 september 2017 14:28:24 CEST schreef u: > > On 04.09.17 11:49, Freek de Kruijf wrote: > > > I used the latest JeOS image 2017.05.23-Build1.1 for the RPi1 (armv6l) > > > on > > > a SD card and booted the system, which went OK. > > > > > > After that I did a "zypper dup --no-recommends" on that system which, at > > > the end, shows the following message: > > > > > > Output of grub2-arm-uboot-2.02-6.1.armv6hl.rpm %posttrans script: > > > update-bootloader: 2017-09-04 11:31:09 <3> update-bootloader-1244 > > > > > > run_command.274: '/usr/lib/bootloader/grub2-efi/install' failed with > > > exit > > > code> > > > > > > 1, output: > > > <<<<<<<<<<<<<<<< > > > target = arm-efi > > > ls: cannot access '/sys/firmware/efi/efivars': No such file or > > > directory > > > + /usr/sbin/grub2-install --target=arm-efi --no-nvram --removable > > > Installing for arm-efi platform. > > > > Can you try to run this command on its own? If it still fails, run it > > with strace -f and upload the output somewhere (or look at it and search > > for failures)? > > > > Thanks! > > > > Alex > > The RPi1 is not EFI system, so I wonder why the target should be arm-efi.
Ass soon as it runs U-Boot, it is ... Kind regards, Stefan -- Stefan Brüns / Bergstraße 21 / 52062 Aachen home: +49 241 53809034 mobile: +49 151 50412019 -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
