Hi, > -----Original Message----- > From: Freek de Kruijf <fr...@opensuse.org> > Sent: 30 October 2019 23:16 > To: opensuse-arm@opensuse.org > Subject: Re: [opensuse-arm] Raspberry Pi 4 Model B > > Op woensdag 30 oktober 2019 20:56:42 CET schreef Matthias Brugger: > > You need to boot with the HDMI cable comnected to the RPi4. This > > should give you an EFI framebuffer. Work on the KMS driver is in > > progress but will take a while. > > >> So, my question is: should I get something in the current state on > > > > > >the HDMI > > > > > >> screen? > > > > Try to add console=tty to your kernel boot parameters. Beware that USB > > is not working ATM. Another thing we are working on, stay tuned. > > No output on the HDMI interface. Is there a way to from within the system that > video output to which HDMI port is active? > > > > >> Is there anything I can do to help with getting TW or Leap 15.1/2 > > > > > >running on the > > > > > >> RPI4? > > > > You could try if i2c and SPI is working on the pins. > > Can you point me to some documentation to see how these things should work?
You can check the following wiki pages https://en.opensuse.org/openSUSE:I2C and https://en.opensuse.org/openSUSE:SPI Guillaume > I did work with python-RPi.GPIO. > > > Regards, > > Matthias > > -- > fr.gr. > > member openSUSE > Freek de Kruijf > > > > -- > To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org > To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
