On 31/10/2019 09:45, Guillaume Gardet wrote:
> Hi,
>
>> -----Original Message-----
>> From: Freek de Kruijf <fr...@opensuse.org>
>> Sent: 30 October 2019 23:16
>> To: opensuse-arm@opensuse.org
>> Subject: Re: [opensuse-arm] Raspberry Pi 4 Model B
>>
>> Op woensdag 30 oktober 2019 20:56:42 CET schreef Matthias Brugger:
>>> You need to boot with the HDMI cable comnected to the RPi4. This
>>> should give you an EFI framebuffer. Work on the KMS driver is in
>>> progress but will take a while.
>>>>> So, my question is: should I get something in the current state on
>>>>
>>>> the HDMI
>>>>
>>>>> screen?
>>>
>>> Try to add console=tty to your kernel boot parameters. Beware that USB
>>> is not working ATM. Another thing we are working on, stay tuned.
>>
>> No output on the HDMI interface. Is there a way to from within the system
>> that
>> video output to which HDMI port is active?
>>
It's the one next to the USB Type-C connector.
Regards,
Matthias
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
