I have a new install of 10.3 and cannot seem to boot the system without
the dvd in the drive.

If I have the dvd in the drive, it defaults to boot to hard disk, it
will pass to the grub menu and the system boots fine.  If I take the
disk out they system tells me to insert a bootable disk.

I have set grub to install to the MBR, I have reinstalled via yast and
with the following commands:

orion:~ # grub-install /dev/sda


    GNU GRUB  version 0.97  (640K lower / 3072K upper memory)

 [ Minimal BASH-like line editing is supported.  For the first word, TAB
   lists possible command completions.  Anywhere else TAB lists the possible
   completions of a device/filename. ]
grub> setup --stage2=/boot/grub/stage2 (hd0) (hd0,1)
 Checking if "/boot/grub/stage1" exists... yes
 Checking if "/boot/grub/stage2" exists... yes
 Checking if "/boot/grub/reiserfs_stage1_5" exists... yes
 Running "embed /boot/grub/reiserfs_stage1_5 (hd0)"...  18 sectors are
embedded.
succeeded
 Running "install --stage2=/boot/grub/stage2 /boot/grub/stage1 (hd0)
(hd0)1+18 p (hd0,1)/boot/grub/stage2 /boot/grub/menu.lst"... succeeded
Done.
grub> quit

orion:~ # grub


    GNU GRUB  version 0.97  (640K lower / 3072K upper memory)

 [ Minimal BASH-like line editing is supported.  For the first word, TAB
   lists possible command completions.  Anywhere else TAB lists the possible
   completions of a device/filename. ]
grub> root (hd0,1)
root (hd0,1)
 Filesystem type is reiserfs, partition type 0x83
grub> setup (hd0)
setup (hd0)
 Checking if "/boot/grub/stage1" exists... yes
 Checking if "/boot/grub/stage2" exists... yes
 Checking if "/boot/grub/reiserfs_stage1_5" exists... yes
 Running "embed /boot/grub/reiserfs_stage1_5 (hd0)"...  18 sectors are
embedded.
succeeded
 Running "install /boot/grub/stage1 (hd0) (hd0)1+18 p
(hd0,1)/boot/grub/stage2 /boot/grub/menu.lst"... succeeded
Done.
grub> quit

I also booted a windows floppy and tried fdisk /mbr and the reinstalled
grub again without sucess.  Any help with this issue would be appreciated.
-- 
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Reply via email to