Hi Glen,
I have set the options as you recommended and I am now getting:
Cant open /sys/class/net//address': No such file or directory
Mount: mounting IP: /home on /tcos/nfshomes/ failed: connection timed out
Thanks for your help on this.
Kind regards
Richard Leyshon
Information Security & Systems Manager | Arc Legal Assistance Limited
Mobile: 07834 801600
0344 770 9000
www.arclegal.co.uk<http://www.arclegal.co.uk>
Arc Legal Assistance Limited, The Gatehouse, Lodge Park, Lodge Lane,
Colchester, CO4 5NE. Registered in England and Wales with Company Number:
4672894. Arc Legal Assistance Limited is authorised and regulated by the
Financial Conduct Authority. Our Firm Reference Number is 305958. Acceptance of
this e-mail and its content is subject to our standard Terms and Conditions
which are available on request or can be viewed online by clicking
here<http://www.arclegal.co.uk/terms/>.
An AmTrust Financial Company.
P Consider the environment; please don't print this email unless you really
need to.
From: Glen Heiberg [mailto:glen.heib...@morton.co.za]
Sent: 15 January 2018 07:03
To: openthinclient-user@lists.sourceforge.net
Subject: Re: [openthinclient-user] network is unreachable issue
Richard,
I've had this issue too, initially. The appliance appears to be misconfigured.
Make sure you set the hardware type to "EN - auto graphics - 64 bit - home in
RAM - autologin", and make sure that the hardware type actually has the "64 bit
kernel, for newer hardware" selected as the kernel to use.
Regards
Glen
From: Richard Leyshon [mailto:richard.leys...@arclegal.co.uk]
Sent: 13 January 2018 4:15 PM
To:
openthinclient-user@lists.sourceforge.net<mailto:openthinclient-user@lists.sourceforge.net>
Subject: [openthinclient-user] network is unreachable issue
Hi,
I have setup openthinclient appliance and am getting the following when booting
up a windows computer using pxe boot:
Can't open /sys/class/net//address: no such file or directory
Mounting IP ADDRESS:/home on /tcos/nfshomes failed: Network is unreachable
If I create a virtualbox client and boot it with two network cards (one using
bridged and one with NAT) it boots successfully.
I have enabled debug and it says the following
IPv6: ADDRCONF (NETDEV_UP): eth0: link is not ready.
Then
IPv6: ADDRCONF (NETDEV_CHANGE): eth0: link becomes ready.
Cant kill pid 3965 no such process
Mounting IP ADDRESS:/home on /tcos/nfshomes failed: Network is unreachable
Cant kill pid 3987 no such process
Mounting IP ADDRESS:/home on /tcos/nfshomes failed: Network is unreachable
Cant kill pid 4009 no such process
DEBUG SHELL: Could not mount IP:/openthinclient via nfs
I have turned off spanning tree protocol as well in case that was the issue.
Any assistance would be greatly appreciated.
Kind regards
Richard Leyshon
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user