Andrew,
Did you modify the eeprom extract hotplug for your board? trunk/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom Regards, Layne On Wed, 03 Aug 2011 01:02:28 +0400, Andrew wrote: > Hello all, > > I've just got an unbranded router from DX with rt3050f. > It looks like a MOFI3500-3GN Clone, 32 Mb SDRAM, 4 megs of flash. The > thing runs at 320 Mhz and has some differences in led gpios to original > thing. > I hacked the openwrt trunk to build the 4 meg image required (none of the > images except mofi even booted the kernel, so it gave me a start). > It even worked. However, I couldn't make the wireless work. I keep > getting: > > phy0 -> rt2x00lib_request_eeprom_file: Error - Failed to request EEPROM. > rt2800_wmac: probe of rt2800_wmac.0 failed with error -2 > > Any ideas what might have caused it? > > I have now mostly formatted all the patches, I'll send them later, once I > figure out the two missing gpio numbers for leds. > > Regards, > Andrew > > _______________________________________________ > openwrt-devel mailing list > [email protected] [1] > https://lists.openwrt.org/mailman/listinfo/openwrt-devel [2] Links: ------ [1] mailto:[email protected] [2] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
