On May 6, 2012 11:55 AM, "Alberich de megres" <[email protected]> wrote: > > And for the Jtag?
Never had to use jtag, so no idea, honestly. Sorry. > > > On Sun, May 6, 2012 at 7:41 AM, Jonathan Bennett <[email protected]> wrote: > > https://www.adafruit.com/products/70 is a great serial cable. It's > > used for ttl level serial. (If you have to solder to the board, it's > > probably ttl. If there is an actual serial port, then it's 12 v > > serial. Different device) > > > > On Sat, May 5, 2012 at 9:16 AM, Alberich de megres > > <[email protected]> wrote: > >> One more last question: > >> > >> which serial/jtag cable do you use? (if it is cheap, better) > >> > >> thanks! > >> > >> > >> On Wed, May 2, 2012 at 5:55 PM, Jonathan Bennett <[email protected]> wrote: > >>> On Sat, Apr 28, 2012 at 9:22 AM, Alberich de megres > >>> <[email protected]> wrote: > >>>> Hi, > >>>> > >>>> @Jonathan, > >>>> how get access to the bootloader? > >>>> do you send it to the router by streaming, or write it and then boot it? > >>> > >>> Get a serial port and watch the output as you turn it on. Normally > >>> there will be a message about how to interrupt the boot loader. Then > >>> you send your image to ram, either over tftp or the serial connection. > >>> then you just boot from where you loaded it in ram. > >>> _______________________________________________ > >>> openwrt-devel mailing list > >>> [email protected] > >>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel > >> _______________________________________________ > >> openwrt-devel mailing list > >> [email protected] > >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel > > _______________________________________________ > > openwrt-devel mailing list > > [email protected] > > https://lists.openwrt.org/mailman/listinfo/openwrt-devel > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
