On Fri, Jul 5, 2013 at 3:57 AM, [email protected] <[email protected]> wrote: > 32MB memory, 8MB flash. If you need 32MB flash they will pass along > for whatever the difference is in chip price.
Which then becomes more expensive than Carambola 2... > I'm starting to discover some the missing pieces in Ralink support. > Like no WifiDirect and no simultaneous (adhoc, AP). Looking at the > Ralink driver I don't see why they couldn't be added, but why isn't > Ralink doing the work? This is also mystery to me. Too lazy, I guess. However, Carambola 1 has RT3050 and AP mode works quite fine - which proves that it is absolutely possible. > > I have found three AR9331 modules in the $10-12 range. But they are > all castellated, I would rather have one with pins. Any idea on the > Q1000 price for Carambo2 without VAT? >From what I see here http://shop.8devices.com/carambola2 they can go down to 15 eur and I would not expect that this would change much for 1k pieces. > Camabola2 is kind of big for our > needs, we like the RT5350 modules since they are putting chips on both > sides of the board. That allows them to be much smaller. I am not really sure on which Toplink board you meandm but from what I see here: http://toplink-tech.en.alibaba.com/product/831612427-218431933/IP_TV_150Mbps_embedded_wifi_router_module.html dimensions are 42x30mm, and here : http://8devices.com/carambola-2 specs say that Carambola 2 module is 28x38 mm BR, Drasko _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
