On March 26, 2014 11:29:59 AM PDT, Sergey Ryazanov <[email protected]>
wrote:
>2014-03-26 9:13 GMT+04:00 Bill Moffitt <[email protected]>:
>> It's clear that SOMETHING is getting time-limited, but I have
>distance=0 and
>> dissassoc_low_ack=0 on both the AP and the station, and I'm not sure
>what
>> else I can tweak.
>>
>Configure distance parameter according to real distance between points.
>
>--
>BR,
>Sergey
Sorry, should have mentioned that, of course, I tried that, and various
variants of that. At 2 miles (~3000 meters) it had a good connection and could
consistently measure bandwidth with iperf. Bandwidth was maximized when
distance=6000 (as expected) and distance=0 (as expected). At 5 miles, it would
not pass traffic with any value of distance. I tried every value than that made
any sense (0, 8000, 16000) and some that didn't (30000, 50) and the results
were the same (nothing).
I note that it appeared to be passing authentication data (per the log) but
failing to authenticate.
I'd be very interested in hearing from anyone who has successfully set up an
encrypted 5+ mile link (8+ km) with this kind of a setup (Ath7k, AA).
Thanks,
Bill
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
