On Wed, Mar 26, 2014 at 3:04 PM, Bill Moffitt <[email protected]> wrote:
> > > On March 26, 2014 11:29:59 AM PDT, Sergey Ryazanov <[email protected]> > wrote: >> >> 2014-03-26 9:13 GMT+04:00 Bill Moffitt <[email protected]>: >> >>> It's clear that SOMETHING is getting time-limited, but I have distance=0 >>> and >>> dissassoc_low_ack=0 on both the AP and the station, and I'm not sure what >>> else I can tweak. >> >> >> Configure distance parameter according to real distance between points. >> >> > Sorry, should have mentioned that, of course, I tried that, and various > variants of that. At 2 miles (~3000 meters) it had a good connection and > could consistently measure bandwidth with iperf. Bandwidth was maximized > when distance=6000 (as expected) and distance=0 (as expected). At 5 miles, > it would not pass traffic with any value of distance. I tried every value > than that made any sense (0, 8000, 16000) and some that didn't (30000, 50) > and the results were the same (nothing). > > I note that it appeared to be passing authentication data (per the log) > but failing to authenticate. > > I'd be very interested in hearing from anyone who has successfully set up > an encrypted 5+ mile link (8+ km) with this kind of a setup (Ath7k, AA). > 5 Miles with a picostation 2MP??? Ive done longer 20+ km with Bullet 2HPs and higher gain antennas, which is my first thought, stick a bigger antenna on it, just might help > > Thanks, > > Bill > > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > >
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
