On Wednesday, June 03, 2015 05:20:22 PM Christian Lamparter wrote:
> The mynet range extender hardware is suffering from ethernet
> link loss when booting with a recent openwrt image. This only
> happens on 100mbps links, with 1Gbps speed the link was fine.
> The cause of the problem is that the AR8035 PHY (aka F1E)
> requires turning on and off the special TX delay setting
> depending on the speed of the link.
> The 10mbps mode only needed the proper pll value, which was
> extracted from the vendor code.
> Reported-by: Pascal Paradis
> Signed-off-by: Christian Lamparter <chunk...@googlemail.com>

No comments so far (but also, no merge). Ping?

openwrt-devel mailing list

Reply via email to