On Tuesday, June 09, 2015 09:24:41 PM Christian Lamparter wrote: > On Tuesday, June 09, 2015 09:05:46 AM Florian Fainelli wrote: > > On Jun 9, 2015 7:36 AM, "Christian Lamparter" <chunk...@googlemail.com> > > wrote: > > > On Wednesday, June 03, 2015 05:20:22 PM Christian Lamparter wrote: > > > > Actually, I have one question, most PHY s should disable these kinds of > > delays when linking at 10/100Mbits/sec. Is not that working here because > > the registers used have a special behavior (force or override), or is it > > broken at the hardware level? > > => The problem with the mynet device is that the tx delay needs to be > enabled for 100mbps/10mbps speed and disabled for 1000mbps. Not doing > so results in an unusable ethernet link (verified by Pascal and me). > This is why I think this is a hardware problem. (Furthermore, Sven > Eckelmann (CC'd, he wrote the support for the OM5P-AN - which also uses > the AT8035) doesn't mention any workaround in his commits.
No further comments so far (but also: no merge). Ping? Thanks, Christian _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
